Search Linux Wireless

Re: [PATCH v2 3/3] rt2x00: do not print error when queue is full

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Dec 20, 2018 at 06:52:03PM +0100, Tom Psyborg wrote:
> Shouldn't you now also revert the commits from
> https://git.openwrt.org/?p=openwrt/staging/dangole.git;a=commitdiff;h=de1c58a64bd66319e770d2587da07d8c9c90174a
> since they caused throughput regression?

For the record: this is not about currently posted patch and you
reference this:
https://lore.kernel.org/linux-wireless/1538697102-3764-1-git-send-email-pozega.tomislav@xxxxxxxxx/

I'm not convinced for reverting. I would rater fix the problem
on top of the patches.

Looking at those images, the performance vary also on "good" case and
there is entry 12.6 Mbits/s there, where the lowest entry on "bad" case
is 32.5 Mbits/s . However, yes, if performance do not drop for unknown
reason, it is 51.4 Mbits/s with patches and 56.6 Mbits/s on good case.

Could you specify after applying which one of those 5 patches
throughput regression starts ?

Thanks
Stanislaw 



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux