On Thu, 2018-12-13 at 13:36 +0800, Kai Heng Feng wrote: > > On Dec 13, 2018, at 08:35, Pkshih <pkshih@xxxxxxxxxxx> wrote: > > > > On Wed, 2018-12-12 at 13:13 +0800, Kai-Heng Feng wrote: > >> Once BSS STA mode gets started, it can be scanned by other clients but > >> cannot entablish a connection. > > ^^^ typo: establish > >> > >> Turns out the set_bcn_reg() and its *_set_beacon_related_registers() > >> callbacks never get called so it has problem beaconing. > >> > >> Enable the function in rtl_op_bss_info_changed() can make BSS STA mode > >> start to work. > >> > >> Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx> > >> --- > >> drivers/net/wireless/realtek/rtlwifi/core.c | 2 +- > >> 1 file changed, 1 insertion(+), 1 deletion(-) > >> > >> diff --git a/drivers/net/wireless/realtek/rtlwifi/core.c > >> b/drivers/net/wireless/realtek/rtlwifi/core.c > >> index 4bf7967590ca..11d27a5cc576 100644 > >> --- a/drivers/net/wireless/realtek/rtlwifi/core.c > >> +++ b/drivers/net/wireless/realtek/rtlwifi/core.c > >> @@ -1054,7 +1054,7 @@ static void rtl_op_bss_info_changed(struct > ieee80211_hw > >> *hw, > >> "BSS_CHANGED_BEACON_ENABLED\n"); > >> > >> /*start hw beacon interrupt. */ > >> - /*rtlpriv->cfg->ops->set_bcn_reg(hw); */ > >> + rtlpriv->cfg->ops->set_bcn_reg(hw); > >> mac->beacon_enabled = 1; > >> rtlpriv->cfg->ops- > >update_interrupt_mask(hw, > >> rtlpriv->cfg->maps > > > > Which wifi chip do you use? And, please share your test scenario. > > It’s Realtek 8723DE, which is currently not supported in mainline so I use > rtl8723de in rtlwifi_new [1] to test it out. > > The test scenario is simply enable hotspot through network manager, which uses > wpa_supplicant to do the work. > > [1] https://github.com/lwfinger/rtlwifi_new > Since rtl8723de isn't supported yet, this patch would be pending. I'll take time to check whether it works on existing chips. Thanks PK
