> On Dec 13, 2018, at 08:35, Pkshih <pkshih@xxxxxxxxxxx> wrote: > > On Wed, 2018-12-12 at 13:13 +0800, Kai-Heng Feng wrote: >> Once BSS STA mode gets started, it can be scanned by other clients but >> cannot entablish a connection. > ^^^ typo: establish >> >> Turns out the set_bcn_reg() and its *_set_beacon_related_registers() >> callbacks never get called so it has problem beaconing. >> >> Enable the function in rtl_op_bss_info_changed() can make BSS STA mode >> start to work. >> >> Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx> >> --- >> drivers/net/wireless/realtek/rtlwifi/core.c | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/drivers/net/wireless/realtek/rtlwifi/core.c >> b/drivers/net/wireless/realtek/rtlwifi/core.c >> index 4bf7967590ca..11d27a5cc576 100644 >> --- a/drivers/net/wireless/realtek/rtlwifi/core.c >> +++ b/drivers/net/wireless/realtek/rtlwifi/core.c >> @@ -1054,7 +1054,7 @@ static void rtl_op_bss_info_changed(struct ieee80211_hw >> *hw, >> "BSS_CHANGED_BEACON_ENABLED\n"); >> >> /*start hw beacon interrupt. */ >> - /*rtlpriv->cfg->ops->set_bcn_reg(hw); */ >> + rtlpriv->cfg->ops->set_bcn_reg(hw); >> mac->beacon_enabled = 1; >> rtlpriv->cfg->ops->update_interrupt_mask(hw, >> rtlpriv->cfg->maps > > Which wifi chip do you use? And, please share your test scenario. It’s Realtek 8723DE, which is currently not supported in mainline so I use rtl8723de in rtlwifi_new [1] to test it out. The test scenario is simply enable hotspot through network manager, which uses wpa_supplicant to do the work. [1] https://github.com/lwfinger/rtlwifi_new Kai-Heng > > Thanks >
