Search Linux Wireless

Re: [PATCH] mt76x0: align mt76x0u and mt76x0e fw version

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



>
> On 2018-10-19 10:58, Lorenzo Bianconi wrote:
> > Unify firmware version used on mt76x0e and mt76x0u drivers.
> > Fallback to mt7610u fw if mt7610e one is not available
> >
> > Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
> > ---
> > this patch is based on top of:
> > https://patchwork.kernel.org/patch/10648399/
> > ---
> >  .../wireless/mediatek/mt76/mt76x0/mt76x0.h    |  2 ++
> >  .../net/wireless/mediatek/mt76/mt76x0/usb.c   |  2 ++
> >  .../wireless/mediatek/mt76/mt76x0/usb_mcu.c   | 23 +++++++++++++++----
> >  3 files changed, 23 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/usb_mcu.c b/drivers/net/wireless/mediatek/mt76/mt76x0/usb_mcu.c
> > index a9f14d5149d1..b57c2a11146f 100644
> > --- a/drivers/net/wireless/mediatek/mt76/mt76x0/usb_mcu.c
> > +++ b/drivers/net/wireless/mediatek/mt76/mt76x0/usb_mcu.c
> > @@ -22,7 +22,6 @@
> >
> >  #define MCU_FW_URB_MAX_PAYLOAD               0x38f8
> >  #define MCU_FW_URB_SIZE                      (MCU_FW_URB_MAX_PAYLOAD + 12)
> > -#define MT7610U_FIRMWARE             "mediatek/mt7610u.bin"
> >
> >  static int
> >  mt76x0u_upload_firmware(struct mt76x02_dev *dev,
> > @@ -75,6 +74,24 @@ mt76x0u_upload_firmware(struct mt76x02_dev *dev,
> >       return err;
> >  }
> >
> > +static int mt76x0_get_firmware(struct mt76x02_dev *dev,
> > +                            const struct firmware **fw)
> > +{
> > +     int err;
> > +
> > +     /* try to load mt7610e fw if available
> > +      * otherwise fall back to mt7610u one
> > +      */
> > +     err = request_firmware(fw, MT7610E_FIRMWARE, dev->mt76.dev);
> > +     if (err) {
> > +             dev_info(dev->mt76.dev, "%s not found, switching to %s",
> > +                      MT7610E_FIRMWARE, MT7610U_FIRMWARE);
> > +             return request_firmware(fw, MT7610U_FIRMWARE,
> > +                                     dev->mt76.dev);
> > +     }
> > +     return 0;
> > +}
> You should use firmware_request_nowarn for the first request.
>
> - Felix

Ack, will do in v2.

Regards,
Lorenzo



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux