Search Linux Wireless

Re: [PATCH v3 4/4] rt2800: fix registers init for MT7620

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 10, 2018 at 10:03:12PM +0200, Tom Psyborg wrote:
> ok, that is strange. do you see any performance differences without
> TX_SW_CFG regs? iperf test is a good pointer.
> 
> this was a problem on xiaomi mini with old DD trunk builds on 4.4
> kernel and LEDE builds from last year. i ain't got no chance to try
> this on 18.06. which device you tried this on? if ipa/ilna it might
> make no difference

No diffrence for me. I have nexx wt3020 8M.

However I notice this set couse performance regression for me. 
When connecting to iwl 7265 . Without the set I have:

root@LEDE:~# iperf3 -c 192.168.10.243
Connecting to host 192.168.10.243, port 5201
[  5] local 192.168.10.1 port 59304 connected to 192.168.10.243 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec  5.37 MBytes  44.9 Mbits/sec    0    279 KBytes       
[  5]   1.00-2.00   sec  5.80 MBytes  48.8 Mbits/sec    0    494 KBytes       
[  5]   2.00-3.00   sec  6.03 MBytes  50.5 Mbits/sec    0    513 KBytes       
[  5]   3.00-4.01   sec  5.90 MBytes  49.2 Mbits/sec    0    513 KBytes       
[  5]   4.01-5.01   sec  5.90 MBytes  49.5 Mbits/sec    0    515 KBytes       
[  5]   5.01-6.00   sec  5.78 MBytes  48.9 Mbits/sec    0    515 KBytes       
[  5]   6.00-7.00   sec  5.66 MBytes  47.4 Mbits/sec    0    515 KBytes       
[  5]   7.00-8.00   sec  6.03 MBytes  50.6 Mbits/sec    0    515 KBytes       
[  5]   8.00-9.00   sec  6.09 MBytes  50.9 Mbits/sec    0    515 KBytes       
[  5]   9.00-10.00  sec  5.72 MBytes  48.2 Mbits/sec    0    515 KBytes       
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  58.3 MBytes  48.9 Mbits/sec    0             sender
[  5]   0.00-10.00  sec  58.3 MBytes  48.9 Mbits/sec                  receiver

With the set I have:

root@LEDE:~# iperf3  -c 192.168.10.243
Connecting to host 192.168.10.243, port 5201
[  5] local 192.168.10.1 port 45824 connected to 192.168.10.243 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec  3.78 MBytes  31.7 Mbits/sec    0    197 KBytes
[  5]   1.00-2.00   sec  3.71 MBytes  31.0 Mbits/sec    0    369 KBytes
[  5]   2.00-3.00   sec  3.51 MBytes  29.5 Mbits/sec    0    484 KBytes
[  5]   3.00-4.00   sec  3.36 MBytes  28.1 Mbits/sec    0    519 KBytes
[  5]   4.00-5.00   sec  4.10 MBytes  34.4 Mbits/sec    0    519 KBytes
[  5]   5.00-6.00   sec  3.73 MBytes  31.2 Mbits/sec    0    519 KBytes
[  5]   6.00-7.00   sec  4.29 MBytes  36.0 Mbits/sec    0    519 KBytes
[  5]   7.00-8.00   sec  4.16 MBytes  34.9 Mbits/sec    0    519 KBytes
[  5]   8.00-9.00   sec  4.35 MBytes  36.5 Mbits/sec    0    519 KBytes
[  5]   9.00-10.00  sec  4.41 MBytes  37.0 Mbits/sec    0    519 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  39.4 MBytes  33.0 Mbits/sec    0             sender
[  5]   0.00-10.00  sec  39.4 MBytes  33.0 Mbits/sec                  receiver


Stanislaw




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux