Search Linux Wireless

Re: [PATCHv2 3/3] ath10k: average ack rssi support for data frames

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Balaji Pothunoori <bpothuno@xxxxxxxxxxxxxx> writes:

> Average ack rssi value is weighted average of ack rssi for
> no of msdu's has been sent.
> This feature is enabled by the host driver if firmware is capable.
> After receiving event from host, firmware allocates the necessary
> memory to store the ack_rssi for data packets during the init time.
>
> After each successful transmission, If tx completion status is OK
> and 24th bit is set in HTT message header then host will fetch the
> ack_rssi else host can ignore the ack_rssi field.
>
> Signed-off-by: Balaji Pothunoori <bpothuno@xxxxxxxxxxxxxx>

There were two new warnings:

drivers/net/wireless/ath/ath10k/htt_rx.c:1928: line over 90 characters
drivers/net/wireless/ath/ath10k/mac.c:8511: Alignment should match open parenthesis

I fixed those in the pending branch. The first one I solved by adding a
temporary variable 'msdus'. Please review:

https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=pending&id=e4ac90b9c915a3b86eeef60509a6d2bb85d3507d

-- 
Kalle Valo



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux