Search Linux Wireless

Re: [PATCHv2,3/3] ath10k: average ack rssi support for data frames

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Balaji Pothunoori <bpothuno@xxxxxxxxxxxxxx> wrote:

> Average ack rssi value is weighted average of ack rssi for
> no of msdu's has been sent.
> This feature is enabled by the host driver if firmware is capable.
> After receiving event from host, firmware allocates the necessary
> memory to store the ack_rssi for data packets during the init time.
> 
> After each successful transmission, If tx completion status is OK
> and 24th bit is set in HTT message header then host will fetch the
> ack_rssi else host can ignore the ack_rssi field.
> 
> Signed-off-by: Balaji Pothunoori <bpothuno@xxxxxxxxxxxxxx>

A note to myself that this depends on:

cc60dbbfed8f mac80211: average ack rssi support for data frames

Currently in mac80211-next.

-- 
https://patchwork.kernel.org/patch/10343153/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux