rt2x00: Remove input_polldev requirements for rfkill
With the new rfkill interface there is no longer a need
for the input_polldev. Create a delayed_work structure
which we can put on the mac80211 workqueue and poll the
hardware every 1000ms.
v2: Decrease poll frequency from 100ms to 1000ms
Signed-off-by: Ivo van Doorn <IvDoorn@xxxxxxxxx>
---
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index 3a9b1d7..d485a86 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -36,9 +36,7 @@ config RT2X00_LIB_FIRMWARE
config RT2X00_LIB_RFKILL
boolean
depends on RT2X00_LIB
- depends on INPUT
select RFKILL
- select INPUT_POLLDEV
config RT2X00_LIB_LEDS
boolean
@@ -57,7 +55,7 @@ config RT2400PCI
config RT2400PCI_RFKILL
bool "Ralink rt2400 rfkill support"
- depends on RT2400PCI && INPUT
+ depends on RT2400PCI
select RT2X00_LIB_RFKILL
---help---
This adds support for integrated rt2400 hardware that features a
@@ -85,7 +83,7 @@ config RT2500PCI
config RT2500PCI_RFKILL
bool "Ralink rt2500 rfkill support"
- depends on RT2500PCI && INPUT
+ depends on RT2500PCI
select RT2X00_LIB_RFKILL
---help---
This adds support for integrated rt2500 hardware that features a
@@ -115,7 +113,7 @@ config RT61PCI
config RT61PCI_RFKILL
bool "Ralink rt2501/rt61 rfkill support"
- depends on RT61PCI && INPUT
+ depends on RT61PCI
select RT2X00_LIB_RFKILL
---help---
This adds support for integrated rt61 hardware that features a
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 6842464..1b28dad 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -649,7 +649,7 @@ struct rt2x00_dev {
#define RFKILL_STATE_ALLOCATED 1
#define RFKILL_STATE_REGISTERED 2
struct rfkill *rfkill;
- struct input_polled_dev *poll_dev;
+ struct delayed_work rfkill_work;
#endif /* CONFIG_RT2X00_LIB_RFKILL */
/*
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index ae8ab71..41b3289 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -1179,7 +1179,6 @@ int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state)
* Suspend/disable extra components.
*/
rt2x00leds_suspend(rt2x00dev);
- rt2x00rfkill_suspend(rt2x00dev);
rt2x00debug_deregister(rt2x00dev);
exit:
@@ -1235,7 +1234,6 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
* Restore/enable extra components.
*/
rt2x00debug_register(rt2x00dev);
- rt2x00rfkill_resume(rt2x00dev);
rt2x00leds_resume(rt2x00dev);
/*
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index 1d1f074..eae5ce1 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -33,7 +33,7 @@
* Both the link tuner as the rfkill will be called once per second.
*/
#define LINK_TUNE_INTERVAL ( round_jiffies_relative(HZ) )
-#define RFKILL_POLL_INTERVAL ( 1000 )
+#define RFKILL_POLL_INTERVAL ( round_jiffies_relative(HZ) )
/*
* rt2x00_rate: Per rate device information
@@ -204,8 +204,6 @@ void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev);
void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev);
void rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev);
void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev);
-void rt2x00rfkill_suspend(struct rt2x00_dev *rt2x00dev);
-void rt2x00rfkill_resume(struct rt2x00_dev *rt2x00dev);
#else
static inline void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev)
{
@@ -222,14 +220,6 @@ static inline void rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev)
static inline void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev)
{
}
-
-static inline void rt2x00rfkill_suspend(struct rt2x00_dev *rt2x00dev)
-{
-}
-
-static inline void rt2x00rfkill_resume(struct rt2x00_dev *rt2x00dev)
-{
-}
#endif /* CONFIG_RT2X00_LIB_RFKILL */
/*
diff --git a/drivers/net/wireless/rt2x00/rt2x00rfkill.c b/drivers/net/wireless/rt2x00/rt2x00rfkill.c
index 207281c..04b2971 100644
--- a/drivers/net/wireless/rt2x00/rt2x00rfkill.c
+++ b/drivers/net/wireless/rt2x00/rt2x00rfkill.c
@@ -23,7 +23,6 @@
Abstract: rt2x00 rfkill routines.
*/
-#include <linux/input-polldev.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/rfkill.h>
@@ -61,15 +60,35 @@ static int rt2x00rfkill_toggle_radio(void *data, enum rfkill_state state)
return retval;
}
-static void rt2x00rfkill_poll(struct input_polled_dev *poll_dev)
+static int rt2x00rfkill_get_state(void *data, enum rfkill_state *state)
{
- struct rt2x00_dev *rt2x00dev = poll_dev->private;
- int state = rt2x00dev->ops->lib->rfkill_poll(rt2x00dev);
+ struct rt2x00_dev *rt2x00dev = data;
- if (rt2x00dev->rfkill->state != state) {
- input_report_key(poll_dev->input, KEY_WLAN, 1);
- input_report_key(poll_dev->input, KEY_WLAN, 0);
- }
+ *state = rt2x00dev->rfkill->state;
+
+ return 0;
+}
+
+static void rt2x00rfkill_poll(struct work_struct *work)
+{
+ struct rt2x00_dev *rt2x00dev =
+ container_of(work, struct rt2x00_dev, rfkill_work.work);
+ int state;
+
+ if (!test_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state))
+ return;
+
+ /*
+ * rfkill_poll reports 1 when the key has been pressed and the
+ * radio should be blocked.
+ */
+ state = !rt2x00dev->ops->lib->rfkill_poll(rt2x00dev) ?
+ RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED;
+
+ rfkill_force_state(rt2x00dev->rfkill, state);
+
+ queue_delayed_work(rt2x00dev->hw->workqueue,
+ &rt2x00dev->rfkill_work, RFKILL_POLL_INTERVAL);
}
void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev)
@@ -83,12 +102,6 @@ void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev)
return;
}
- if (input_register_polled_device(rt2x00dev->poll_dev)) {
- ERROR(rt2x00dev, "Failed to register polled device.\n");
- rfkill_unregister(rt2x00dev->rfkill);
- return;
- }
-
__set_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state);
/*
@@ -96,7 +109,7 @@ void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev)
* and correctly sends the signal to the rfkill layer about this
* state.
*/
- rt2x00rfkill_poll(rt2x00dev->poll_dev);
+ rt2x00rfkill_poll(&rt2x00dev->rfkill_work.work);
}
void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev)
@@ -105,38 +118,13 @@ void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev)
!test_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state))
return;
- input_unregister_polled_device(rt2x00dev->poll_dev);
+ cancel_delayed_work_sync(&rt2x00dev->rfkill_work);
+
rfkill_unregister(rt2x00dev->rfkill);
__clear_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state);
}
-static struct input_polled_dev *
-rt2x00rfkill_allocate_polldev(struct rt2x00_dev *rt2x00dev)
-{
- struct input_polled_dev *poll_dev;
-
- poll_dev = input_allocate_polled_device();
- if (!poll_dev)
- return NULL;
-
- poll_dev->private = rt2x00dev;
- poll_dev->poll = rt2x00rfkill_poll;
- poll_dev->poll_interval = RFKILL_POLL_INTERVAL;
-
- poll_dev->input->name = rt2x00dev->ops->name;
- poll_dev->input->phys = wiphy_name(rt2x00dev->hw->wiphy);
- poll_dev->input->id.bustype = BUS_HOST;
- poll_dev->input->id.vendor = 0x1814;
- poll_dev->input->id.product = rt2x00dev->chip.rt;
- poll_dev->input->id.version = rt2x00dev->chip.rev;
- poll_dev->input->dev.parent = wiphy_dev(rt2x00dev->hw->wiphy);
- poll_dev->input->evbit[0] = BIT(EV_KEY);
- set_bit(KEY_WLAN, poll_dev->input->keybit);
-
- return poll_dev;
-}
-
void rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev)
{
if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
@@ -153,14 +141,9 @@ void rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev)
rt2x00dev->rfkill->data = rt2x00dev;
rt2x00dev->rfkill->state = -1;
rt2x00dev->rfkill->toggle_radio = rt2x00rfkill_toggle_radio;
+ rt2x00dev->rfkill->get_state = rt2x00rfkill_get_state;
- rt2x00dev->poll_dev = rt2x00rfkill_allocate_polldev(rt2x00dev);
- if (!rt2x00dev->poll_dev) {
- ERROR(rt2x00dev, "Failed to allocate polled device.\n");
- rfkill_free(rt2x00dev->rfkill);
- rt2x00dev->rfkill = NULL;
- return;
- }
+ INIT_DELAYED_WORK(&rt2x00dev->rfkill_work, rt2x00rfkill_poll);
return;
}
@@ -171,32 +154,8 @@ void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev)
!test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state))
return;
- input_free_polled_device(rt2x00dev->poll_dev);
- rt2x00dev->poll_dev = NULL;
+ cancel_delayed_work_sync(&rt2x00dev->rfkill_work);
rfkill_free(rt2x00dev->rfkill);
rt2x00dev->rfkill = NULL;
}
-
-void rt2x00rfkill_suspend(struct rt2x00_dev *rt2x00dev)
-{
- if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags) ||
- !test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state))
- return;
-
- input_free_polled_device(rt2x00dev->poll_dev);
- rt2x00dev->poll_dev = NULL;
-}
-
-void rt2x00rfkill_resume(struct rt2x00_dev *rt2x00dev)
-{
- if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags) ||
- !test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state))
- return;
-
- rt2x00dev->poll_dev = rt2x00rfkill_allocate_polldev(rt2x00dev);
- if (!rt2x00dev->poll_dev) {
- ERROR(rt2x00dev, "Failed to allocate polled device.\n");
- return;
- }
-}
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
