Search Linux Wireless

[PATCH 06/10] rtlwifi: Fix VHT NSS in RC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Ping-Ke Shih <pkshih@xxxxxxxxxxx>

NSS is a argument of highest rate in RC, and it occupies bit 4-7 so use
ieee80211_rate_set_vht() to fill the values. Since it got correct rate
index, we don't need to check chips to assign NSS in set function anymore.

Signed-off-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
---
 drivers/net/wireless/realtek/rtlwifi/rc.c | 49 +++++++++++++++++++++++++------
 1 file changed, 40 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/rc.c b/drivers/net/wireless/realtek/rtlwifi/rc.c
index d1cb7d405618..396bed8d3d51 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rc.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rc.c
@@ -42,6 +42,17 @@ static u8 _rtl_rc_get_highest_rix(struct rtl_priv *rtlpriv,
 	struct rtl_phy *rtlphy = &(rtlpriv->phy);
 	struct rtl_sta_info *sta_entry = NULL;
 	u16 wireless_mode = 0;
+	u8 nss;
+	struct ieee80211_tx_rate rate;
+
+	if (get_rf_type(rtlphy) >= RF_4T4R)
+		nss = 4;
+	else if (get_rf_type(rtlphy) >= RF_3T3R)
+		nss = 3;
+	else if (get_rf_type(rtlphy) >= RF_2T2R)
+		nss = 2;
+	else
+		nss = 1;
 
 	/*
 	 *this rate is no use for true rate, firmware
@@ -66,28 +77,51 @@ static u8 _rtl_rc_get_highest_rix(struct rtl_priv *rtlpriv,
 			} else if (wireless_mode == WIRELESS_MODE_G) {
 				return G_MODE_MAX_RIX;
 			} else if (wireless_mode == WIRELESS_MODE_N_24G) {
-				if (get_rf_type(rtlphy) != RF_2T2R)
+				if (nss == 1)
 					return N_MODE_MCS7_RIX;
 				else
 					return N_MODE_MCS15_RIX;
 			} else if (wireless_mode == WIRELESS_MODE_AC_24G) {
-				return AC_MODE_MCS9_RIX;
+				if (sta->bandwidth == IEEE80211_STA_RX_BW_20) {
+					ieee80211_rate_set_vht(&rate,
+							       AC_MODE_MCS8_RIX,
+							       nss);
+					goto out;
+				} else {
+					ieee80211_rate_set_vht(&rate,
+							       AC_MODE_MCS9_RIX,
+							       nss);
+					goto out;
+				}
 			}
 			return 0;
 		} else {
 			if (wireless_mode == WIRELESS_MODE_A) {
 				return A_MODE_MAX_RIX;
 			} else if (wireless_mode == WIRELESS_MODE_N_5G) {
-				if (get_rf_type(rtlphy) != RF_2T2R)
+				if (nss == 1)
 					return N_MODE_MCS7_RIX;
 				else
 					return N_MODE_MCS15_RIX;
 			} else if (wireless_mode == WIRELESS_MODE_AC_5G) {
-				return AC_MODE_MCS9_RIX;
+				if (sta->bandwidth == IEEE80211_STA_RX_BW_20) {
+					ieee80211_rate_set_vht(&rate,
+							       AC_MODE_MCS8_RIX,
+							       nss);
+					goto out;
+				} else {
+					ieee80211_rate_set_vht(&rate,
+							       AC_MODE_MCS9_RIX,
+							       nss);
+					goto out;
+				}
 			}
 			return 0;
 		}
 	}
+
+out:
+	return rate.idx;
 }
 
 static void _rtl_rc_rate_set_series(struct rtl_priv *rtlpriv,
@@ -111,9 +145,6 @@ static void _rtl_rc_rate_set_series(struct rtl_priv *rtlpriv,
 	}
 	rate->count = tries;
 	rate->idx = rix >= 0x00 ? rix : 0x00;
-	if (rtlpriv->rtlhal.hw_type == HARDWARE_TYPE_RTL8812AE &&
-	    wireless_mode == WIRELESS_MODE_AC_5G)
-		rate->idx += 0x10;/*2NSS for 8812AE*/
 
 	if (!not_data) {
 		if (txrc->short_preamble)
@@ -126,10 +157,10 @@ static void _rtl_rc_rate_set_series(struct rtl_priv *rtlpriv,
 			if (sta && sta->vht_cap.vht_supported)
 				rate->flags |= IEEE80211_TX_RC_80_MHZ_WIDTH;
 		} else {
-			if (mac->bw_40)
-				rate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
 			if (mac->bw_80)
 				rate->flags |= IEEE80211_TX_RC_80_MHZ_WIDTH;
+			else if (mac->bw_40)
+				rate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
 		}
 
 		if (sgi_20 || sgi_40 || sgi_80)
-- 
2.15.1




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux