Hi,
Could have used a 'v2' in the subject, but hopefully that doesn't bother
Kalle too much.
On Fri, Sep 08, 2017 at 02:02:43AM +0530, Ganapathi Bhat wrote:
> If driver is loaded with 'mfg_mode' enabled, then the sending
> commands are not allowed. So, skip sending commands, to firmware
> in mwifiex_add_virtual_intf if 'mfg_mode' is enabled.
>
> Fixes: 7311ea850079 ("mwifiex: fix AP start problem for newly added interface")
> Signed-off-by: Ganapathi Bhat <gbhat@xxxxxxxxxxx>
> ---
> v2: addressed Brian's comments.
> ---
> drivers/net/wireless/marvell/mwifiex/cfg80211.c | 19 +++++++++++--------
> 1 file changed, 11 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
> index 32c5074..ad1ebd8 100644
> --- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c
> +++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
> @@ -2959,18 +2959,21 @@ struct wireless_dev *mwifiex_add_virtual_intf(struct wiphy *wiphy,
> }
>
> mwifiex_init_priv_params(priv, dev);
> - mwifiex_set_mac_address(priv, dev);
>
> priv->netdev = dev;
>
> - ret = mwifiex_send_cmd(priv, HostCmd_CMD_SET_BSS_MODE,
> - HostCmd_ACT_GEN_SET, 0, NULL, true);
> - if (ret)
> - goto err_set_bss_mode;
> + if (!adapter->mfg_mode) {
> + mwifiex_set_mac_address(priv, dev);
>
> - ret = mwifiex_sta_init_cmd(priv, false, false);
> - if (ret)
> - goto err_sta_init;
> + ret = mwifiex_send_cmd(priv, HostCmd_CMD_SET_BSS_MODE,
> + HostCmd_ACT_GEN_SET, 0, NULL, true);
> + if (ret)
> + goto err_set_bss_mode;
> +
> + ret = mwifiex_sta_init_cmd(priv, false, false);
> + if (ret)
> + goto err_sta_init;
> + }
Seems better to me.
Reviewed-by: Brian Norris <briannorris@xxxxxxxxxxxx>
>
> mwifiex_setup_ht_caps(&wiphy->bands[NL80211_BAND_2GHZ]->ht_cap, priv);
> if (adapter->is_hw_11ac_capable)
> --
> 1.9.1
>
