We should not copy the MCS set from hostapd RX-STBC. We have to just use the MCS set supported by the hardware. This fixes an issue, where mwifiex is advertising wrong MCS sets in beacons. Fixes: 474a41e94 ("mwifiex: update MCS set as per RX-STBC bit from hostapd") Signed-off-by: Ganapathi Bhat <gbhat@xxxxxxxxxxx> --- drivers/net/wireless/marvell/mwifiex/fw.h | 5 ----- drivers/net/wireless/marvell/mwifiex/uap_cmd.c | 22 ---------------------- 2 files changed, 27 deletions(-) diff --git a/drivers/net/wireless/marvell/mwifiex/fw.h b/drivers/net/wireless/marvell/mwifiex/fw.h index 4a848e8..07d3a0a 100644 --- a/drivers/net/wireless/marvell/mwifiex/fw.h +++ b/drivers/net/wireless/marvell/mwifiex/fw.h @@ -247,11 +247,6 @@ enum MWIFIEX_802_11_PRIVACY_FILTER { #define MWIFIEX_DEF_AMPDU IEEE80211_HT_AMPDU_PARM_FACTOR -#define GET_RXSTBC(x) (x & IEEE80211_HT_CAP_RX_STBC) -#define MWIFIEX_RX_STBC1 0x0100 -#define MWIFIEX_RX_STBC12 0x0200 -#define MWIFIEX_RX_STBC123 0x0300 - /* dev_cap bitmap * BIT * 0-16 reserved diff --git a/drivers/net/wireless/marvell/mwifiex/uap_cmd.c b/drivers/net/wireless/marvell/mwifiex/uap_cmd.c index 35d8636..477c29c 100644 --- a/drivers/net/wireless/marvell/mwifiex/uap_cmd.c +++ b/drivers/net/wireless/marvell/mwifiex/uap_cmd.c @@ -160,7 +160,6 @@ int mwifiex_set_secure_params(struct mwifiex_private *priv, struct cfg80211_ap_settings *params) { const u8 *ht_ie; - u16 cap_info; if (!ISSUPP_11NENABLED(priv->adapter->fw_cap_info)) return; @@ -170,27 +169,6 @@ int mwifiex_set_secure_params(struct mwifiex_private *priv, if (ht_ie) { memcpy(&bss_cfg->ht_cap, ht_ie + 2, sizeof(struct ieee80211_ht_cap)); - cap_info = le16_to_cpu(bss_cfg->ht_cap.cap_info); - memset(&bss_cfg->ht_cap.mcs, 0, - priv->adapter->number_of_antenna); - switch (GET_RXSTBC(cap_info)) { - case MWIFIEX_RX_STBC1: - /* HT_CAP 1X1 mode */ - bss_cfg->ht_cap.mcs.rx_mask[0] = 0xff; - break; - case MWIFIEX_RX_STBC12: /* fall through */ - case MWIFIEX_RX_STBC123: - /* HT_CAP 2X2 mode */ - bss_cfg->ht_cap.mcs.rx_mask[0] = 0xff; - bss_cfg->ht_cap.mcs.rx_mask[1] = 0xff; - break; - default: - mwifiex_dbg(priv->adapter, WARN, - "Unsupported RX-STBC, default to 2x2\n"); - bss_cfg->ht_cap.mcs.rx_mask[0] = 0xff; - bss_cfg->ht_cap.mcs.rx_mask[1] = 0xff; - break; - } priv->ap_11n_enabled = 1; } else { memset(&bss_cfg->ht_cap, 0, sizeof(struct ieee80211_ht_cap)); -- 1.9.1