i tried the following firmwares: 2.4.4.0.arm 2.4.6.0.arm 2.5.11.0.arm 2.5.6.0.arm 2.5.2.0.arm 2.7.0.0.arm All give the same dmesg output, (HC died; cleaning up)except 2.5.8.0.arm which gives something else, probably not worth much, but nevertheless see attachment
In the very beginning I used ndiswrapper without any problem (still works now), but at the moment i'm using the old islsm driver together with kernel 2.6.9 and firmware 2.5.6.0 (only one that works), which doesn't seem to be on the site you mentioned
md5sum:6ff238179cf9618aac2b5d7a34e41450 2.5.6.0.arm (is included for what it is worth) So i've been stuck at kernel 2.6.9 for some time now as islsm doesn't compile with newer kernels :-) p54usb should be a relatively straight port from islsm yes ? except for the control rate algorithm and some cleaning up i guess.
ps: thanks for the effort.ps2: firmware 2.5.7.0 isn't on site too: 09f9da7ea757173c9de1a0322a1f9782 2.7.0.0.arm
kind regards, Ivo Couckuyt Chr wrote:
On Sunday 08 June 2008 13:54:14 Johannes Berg wrote:On Fri, 2008-06-06 at 23:06 +0200, Ivo Couckuyt wrote:Sorry for the late reply, i just thought i install kernel 2.6.25 r4 and try again. It is somewhat better and worse, when modprobing p54usb i got a small hang/hickup accompanied with the following error in dmesg ehci_hcd 0000:00:02.2: HC died; cleaning up [...]Sorry, no idea. Christian?Not yet... but card is on the way, so maybe in the future. :)I googled for "HC died; cleaning up" and yes, there "are" other people with the same issue... But noone had a solutions other than use ndiswrapper.So, i took a look at the driver... it ships with a really old firmware 2.4.6.0 So, I know that there are atleast some (mini)PCI Cards that have big problems with anything newer than 2.4.x.y, maybe there are broken USB-Parts too...Ivo, can you please try the older firmware? You can find a copy @ (http://daemonizer.de/prism54/prism54-fw/ scroll down to USB). If this doesn't work? could you please about ndiswrapper? Regards, Christian
usb 1-1: new high speed USB device using ehci_hcd and address 5 usb 1-1: configuration #1 chosen from 1 choice p54: LM86 firmware p54: FW rev 2.5.8.0 - Softmac protocol 3.0 prism54usb: probe of 1-1:1.0 failed with error -110 usbcore: registered new interface driver prism54usb
Attachment:
2.5.6.0.arm
Description: Binary data
