ibss and mesh modes copy the ht capabilites from the band without overriding the SMPS state. Unfortunately the default value 0 for the SMPS field means static SMPS instead of disabled. This results in HT ibss and mesh setups using only single-stream rates, even though SMPS is not supposed to be active. Initialize SMPS to disabled for all bands on ieee80211_hw_register to ensure that the value is sane where it is not overriden with the real SMPS state. Reported-by: Elektra Wagenrad <onelektra@xxxxxxx> Signed-off-by: Felix Fietkau <nbd@xxxxxxxx> --- net/mac80211/main.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 1822c77f2b1c..c269046aa02b 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -913,10 +913,15 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) supp_ht = supp_ht || sband->ht_cap.ht_supported; supp_vht = supp_vht || sband->vht_cap.vht_supported; - if (sband->ht_cap.ht_supported) - local->rx_chains = - max(ieee80211_mcs_to_chains(&sband->ht_cap.mcs), - local->rx_chains); + if (!sband->ht_cap.ht_supported) + continue; + + local->rx_chains = + max(ieee80211_mcs_to_chains(&sband->ht_cap.mcs), + local->rx_chains); + + sband->ht_cap.cap |= WLAN_HT_CAP_SM_PS_DISABLED << + IEEE80211_HT_CAP_SM_PS_SHIFT; /* TODO: consider VHT for RX chains, hopefully it's the same */ } -- 2.11.0
