Search Linux Wireless

RE: Problems getting mwifiex with sd8887 to work

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Wolfram,

> From: Wolfram Sang [mailto:wsa@xxxxxxxxxxxxx]
> Sent: Sunday, November 13, 2016 7:44 PM
> To: Amitkumar Karwar
> Cc: linux-wireless@xxxxxxxxxxxxxxx; Nishant Sarmukadam; Kalle Valo
> Subject: Re: Problems getting mwifiex with sd8887 to work
> 
> > 0x242 command failure is expected for sd8887, as It's not supported.
> 
> Is the same true for 0x10f?
> 
> mwifiex_sdio mmc2:0001:1: CMD_RESP: cmd 0x10f error, result=0x2
> 
> Otherwise I can connect to the network and run performance tests now.

Error code 2 from firmware is unsupported command. You can ignore this and earlier 
error seen for 0x242 command. They aren't harmful.

Regards,
Amitkumar



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux