Hi, (please don't toppost) On 23 October 2016 at 21:42, Oliver Zemann <oliver.zemann@xxxxxxxxx> wrote: > Thanks, but its still not working. I dont get any error now when i do > modprobe and installed is the wle900 > > [root@alarm alarm]# rmmod ath10k_pci > [root@alarm alarm]# modprobe ath10k_pci irq_mode=1 Strange, this was working for me with a Sparklan WPEA-352ACN. > > but: > > [root@alarm alarm]# dmesg | grep ath10k > [ 220.356314] ath10k_pci 0000:02:00.0: Refused to change power state, > currently in D3 Maybe there is a separate issue related to this. I don't remember seeing this message in my kernel log. (At least to me) it would be interesting to know if it works using a LEDE image, or if it fails there as well. I don't have a Compex card here. You can find an sd-card image at https://downloads.lede-project.org/snapshots/targets/mvebu/generic/ - it won't contain any wifi drivers though, you will need to install them separately - easiest by providing internet access over the wan port (the single ethernet port for the pro, it defaults to dhcp client), then running "opkg install kmod-ath10k" on shell. Note that this kernel has MSI disabled, so you don't need to do anything there extra. > [ 220.394265] ath10k_pci 0000:02:00.0: failed to wake up device : -110 > [ 220.400770] ath10k_pci: probe of 0000:02:00.0 failed with error -110 > > [root@alarm alarm]# cat /proc/cmdline > console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait ath10k_pci.irq_mode=1 > > Thanks for your patience Regards Jonas
