I also try to get a pcie wifi card (Compex WLE600VX) running in the
clearfog pro board with kernel 4.4.
As I read in this thread the "irg.mode=1" shoud help:
https://www.spinics.net/lists/linux-wireless/msg155685.html
But it is not working for me:
debian@clearfog:~$ lsmod
Module Size Used by
8021q 36864 0
garp 16384 1 8021q
mrp 20480 1 8021q
stp 16384 1 garp
llc 16384 2 stp,garp
bnep 20480 2
ath10k_pci 45056 0
ath10k_core 249856 1 ath10k_pci
ath 32768 1 ath10k_core
mac80211 786432 1 ath10k_core
bluetooth 385024 7 bnep
qcserial 16384 0
cfg80211 561152 3 ath,mac80211,ath10k_core
usb_wwan 16384 1 qcserial
qmi_wwan 24576 0
cdc_wdm 20480 1 qmi_wwan
usbserial 40960 2 qcserial,usb_wwan
usbnet 36864 1 qmi_wwan
mii 16384 1 usbnet
rfkill 32768 4 cfg80211,bluetooth
firmware_class 24576 1 ath10k_core
marvell_cesa 45056 0
ehci_orion 16384 0
des_generic 28672 1 marvell_cesa
mcp3021 16384 0
hwmon 16384 1 mcp3021
evbug 16384 0
uio_pdrv_genirq 16384 0
uio 20480 1 uio_pdrv_genirq
fuse 102400 1
ipv6 532480 0
autofs4 36864 2
debian@clearfog:~$ uname -a
Linux clearfog 4.4.15-clearfog #1 SMP Wed Oct 5 00:03:36 UTC 2016 armv7l
GNU/Linux
debian@clearfog:~$ sudo rmmod ath10k_pci ath10k_core
debian@clearfog:~$ sudo modprobe ath10k_core
debian@clearfog:~$ sudo modprobe ath10k_pci
[ 69.529351] ath10k_pci 0000:01:00.0: Refused to change power state,
currently in D3
[ 69.567989] ath10k_pci 0000:01:00.0: failed to wake up device : -110
[ 69.575267] ath10k_pci: probe of 0000:01:00.0 failed with error -110
debian@clearfog:~$ sudo rmmod ath10k_pci ath10k_core
debian@clearfog:~$ sudo modprobe ath10k_core
debian@clearfog:~$ sudo modprobe ath10k_pci irq_mode=1
[ 97.899370] ath10k_pci 0000:01:00.0: Refused to change power state,
currently in D3
[ 97.938045] ath10k_pci 0000:01:00.0: failed to wake up device : -110
[ 97.944973] ath10k_pci: probe of 0000:01:00.0 failed with error -110
debian@clearfog:~$ lspci -vvv
00:02.0 PCI bridge: Marvell Technology Group Ltd. Device 6828 (rev 04)
(prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f8000000-f82fffff
Prefetchable memory behind bridge: 00000000-000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:03.0 PCI bridge: Marvell Technology Group Ltd. Device 6828 (rev 04)
(prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000-000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
01:00.0 Network controller: Qualcomm Atheros QCA988x 802.11ac Wireless
Network Adapter (rev ff) (prog-if ff)
!!! Unknown header type 7f
Something else what I can try?
Best regards,
Matthias
