Search Linux Wireless

Re: [PATCH 3/3] mac80211: multicast to unicast conversion

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am 05.10.2016 13:58, schrieb Johannes Berg:

Anyway, perhaps this needs to change to take DMS/per-station into
account?

Then again, this kind of setting - global multicast-to-unicast -
fundamentally *cannot* be done on a per-station basis, since if you
enable it for one station and not for another, the first station that
has it enabled would get the packets twice...

as I see it, that is exactly how DMS is standarized.

IEEE 802.11-2012 section 10.23.15 DMS procedures:

"If the requested DMS is accepted by the AP, the AP shall send subsequent group addressed MSDUs that match the frame classifier specified in the DMS Descriptors to the requesting STA as A-MSDU subframes
within an individually addressed A-MSDU frame (see 8.3.2.2 and 9.11)."

-> so the multicast packets shall go out as unicast A-MSDU frames to stations that requested this

"The AP shall continue to transmit the matching frames as group addressed frames (see 9.3.6, and 10.2.1.16) if at least one associated STA has not requested DMS for these frames."

 -> so it will continue to send it as multicast frames as well.

As with DMS the station requested DMS for a specific multicast address, it could then drop multicast frames addressed to the multicast address it registered for DMS.

Regards,
M. Braun



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux