From: Jes Sorensen <Jes.Sorensen@xxxxxxxxxx>
This allows the user to specify DMA aggregation timout and block
count. Blocks are presumably always 512 bytes, so the minimum block
count is 6 for 802.11 packets.
Signed-off-by: Jes Sorensen <Jes.Sorensen@xxxxxxxxxx>
---
.../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 28 ++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 609c216..ca4c40d 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -45,6 +45,8 @@
int rtl8xxxu_debug = RTL8XXXU_DEBUG_EFUSE;
static bool rtl8xxxu_ht40_2g;
static bool rtl8xxxu_dma_aggregation;
+static int rtl8xxxu_dma_agg_timeout = -1;
+static int rtl8xxxu_dma_agg_pages = -1;
MODULE_AUTHOR("Jes Sorensen <Jes.Sorensen@xxxxxxxxxx>");
MODULE_DESCRIPTION("RTL8XXXu USB mac80211 Wireless LAN Driver");
@@ -65,6 +67,10 @@ module_param_named(ht40_2g, rtl8xxxu_ht40_2g, bool, 0600);
MODULE_PARM_DESC(ht40_2g, "Enable HT40 support on the 2.4GHz band");
module_param_named(dma_aggregation, rtl8xxxu_dma_aggregation, bool, 0600);
MODULE_PARM_DESC(dma_aggregation, "Enable DMA packet aggregation");
+module_param_named(dma_agg_timeout, rtl8xxxu_dma_agg_timeout, int, 0600);
+MODULE_PARM_DESC(dma_agg_timeout, "Set DMA aggregation timeout (range 1-127)");
+module_param_named(dma_agg_pages, rtl8xxxu_dma_agg_pages, int, 0600);
+MODULE_PARM_DESC(dma_agg_pages, "Set DMA aggregation pages (range 1-127, 0 to disable)");
#define USB_VENDOR_ID_REALTEK 0x0bda
#define RTL8XXXU_RX_URBS 32
@@ -4441,6 +4447,18 @@ void rtl8xxxu_gen1_init_aggregation(struct rtl8xxxu_priv *priv)
*/
page_thresh = (priv->fops->rx_agg_buf_size / 512);
+ if (rtl8xxxu_dma_agg_pages >= 0) {
+ if (rtl8xxxu_dma_agg_pages <= page_thresh)
+ timeout = page_thresh;
+ else if (rtl8xxxu_dma_agg_pages <= 6)
+ dev_err(&priv->udev->dev,
+ "%s: dma_agg_pages=%i too small, minium is 6\n",
+ __func__, rtl8xxxu_dma_agg_pages);
+ else
+ dev_err(&priv->udev->dev,
+ "%s: dma_agg_pages=%i larger than limit %i\n",
+ __func__, rtl8xxxu_dma_agg_pages, page_thresh);
+ }
rtl8xxxu_write8(priv, REG_RXDMA_AGG_PG_TH, page_thresh);
/*
* REG_RXDMA_AGG_PG_TH + 1 seems to be the timeout register on
@@ -4448,6 +4466,16 @@ void rtl8xxxu_gen1_init_aggregation(struct rtl8xxxu_priv *priv)
* don't set it, so better set both.
*/
timeout = 4;
+
+ if (rtl8xxxu_dma_agg_timeout >= 0) {
+ if (rtl8xxxu_dma_agg_timeout <= 127)
+ timeout = rtl8xxxu_dma_agg_timeout;
+ else
+ dev_err(&priv->udev->dev,
+ "%s: Invalid dma_agg_timeout: %i\n",
+ __func__, rtl8xxxu_dma_agg_timeout);
+ }
+
rtl8xxxu_write8(priv, REG_RXDMA_AGG_PG_TH + 1, timeout);
rtl8xxxu_write8(priv, REG_USB_DMA_AGG_TO, timeout);
priv->rx_buf_aggregation = 1;
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
