From: Jes Sorensen <Jes.Sorensen@xxxxxxxxxx>
gen2 chips as well as 8188eu seems to use this register for setting
DMA timeout threshold values, however the 8192cu is using
REG_USB_DMA_AGG_TO. Set both to be on the safe side.
Signed-off-by: Jes Sorensen <Jes.Sorensen@xxxxxxxxxx>
---
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index b392a92..609c216 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -4410,7 +4410,7 @@ void rtl8xxxu_gen2_report_connect(struct rtl8xxxu_priv *priv,
void rtl8xxxu_gen1_init_aggregation(struct rtl8xxxu_priv *priv)
{
- u8 agg_ctrl, usb_spec, page_thresh;
+ u8 agg_ctrl, usb_spec, page_thresh, timeout;
usb_spec = rtl8xxxu_read8(priv, REG_USB_SPECIAL_OPTION);
usb_spec &= ~USB_SPEC_USB_AGG_ENABLE;
@@ -4442,7 +4442,14 @@ void rtl8xxxu_gen1_init_aggregation(struct rtl8xxxu_priv *priv)
page_thresh = (priv->fops->rx_agg_buf_size / 512);
rtl8xxxu_write8(priv, REG_RXDMA_AGG_PG_TH, page_thresh);
- rtl8xxxu_write8(priv, REG_USB_DMA_AGG_TO, 4);
+ /*
+ * REG_RXDMA_AGG_PG_TH + 1 seems to be the timeout register on
+ * gen2 chips and rtl8188eu. The rtl8723au seems unhappy if we
+ * don't set it, so better set both.
+ */
+ timeout = 4;
+ rtl8xxxu_write8(priv, REG_RXDMA_AGG_PG_TH + 1, timeout);
+ rtl8xxxu_write8(priv, REG_USB_DMA_AGG_TO, timeout);
priv->rx_buf_aggregation = 1;
}
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
