The driver for RTL8188EE chips is converted to use the common routine
for getting the hardware information.
Reported-by: Arnd Bergmann <arnd@xxxxxxxx>
Signed-off-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
Cc: Arnd Bergmann <arnd@xxxxxxxx>
---
V2 - Fixes bug found after V1 was submitted.
This patch requires ("rtlwifi: Add missing newlines to RT_TRACE calls")
submitted by Joe Perches.
---
.../net/wireless/realtek/rtlwifi/rtl8188ee/hw.c | 76 ++++------------------
1 file changed, 13 insertions(+), 63 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c
index cfdf6d8..4ab6201 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c
@@ -1835,76 +1835,24 @@ static void _rtl88ee_read_adapter_info(struct ieee80211_hw *hw)
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
- u16 i, usvalue;
- u8 hwinfo[HWSET_MAX_SIZE];
- u16 eeprom_id;
-
- switch (rtlefuse->epromtype) {
- case EEPROM_BOOT_EFUSE:
- rtl_efuse_shadow_map_update(hw);
- break;
-
- case EEPROM_93C46:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "RTL819X Not boot from eeprom, check it !!\n");
+ int params[] = {RTL8188E_EEPROM_ID, EEPROM_VID, EEPROM_DID,
+ EEPROM_SVID, EEPROM_SMID, EEPROM_MAC_ADDR,
+ EEPROM_CHANNELPLAN, EEPROM_VERSION, EEPROM_CUSTOMER_ID,
+ COUNTRY_CODE_WORLD_WIDE_13};
+ u8 *hwinfo;
+
+ hwinfo = kzalloc(HWSET_MAX_SIZE, GFP_KERNEL);
+ if (!hwinfo)
return;
- default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "boot from neither eeprom nor efuse, check it !!\n");
- return;
- }
- memcpy(hwinfo, &rtlefuse->efuse_map[EFUSE_INIT_MAP][0], HWSET_MAX_SIZE);
-
- RT_PRINT_DATA(rtlpriv, COMP_INIT, DBG_DMESG, "MAP\n",
- hwinfo, HWSET_MAX_SIZE);
-
- eeprom_id = *((u16 *)&hwinfo[0]);
- if (eeprom_id != RTL8188E_EEPROM_ID) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
- "EEPROM ID(%#x) is invalid!!\n", eeprom_id);
- rtlefuse->autoload_failflag = true;
- } else {
- RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "Autoload OK\n");
- rtlefuse->autoload_failflag = false;
- }
+ if (rtl_get_hwinfo(hw, rtlpriv, HWSET_MAX_SIZE, hwinfo, params))
+ goto exit;
- if (rtlefuse->autoload_failflag == true)
- return;
- /*VID DID SVID SDID*/
- rtlefuse->eeprom_vid = *(u16 *)&hwinfo[EEPROM_VID];
- rtlefuse->eeprom_did = *(u16 *)&hwinfo[EEPROM_DID];
- rtlefuse->eeprom_svid = *(u16 *)&hwinfo[EEPROM_SVID];
- rtlefuse->eeprom_smid = *(u16 *)&hwinfo[EEPROM_SMID];
- RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
- "EEPROMId = 0x%4x\n", eeprom_id);
- RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
- "EEPROM VID = 0x%4x\n", rtlefuse->eeprom_vid);
- RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
- "EEPROM DID = 0x%4x\n", rtlefuse->eeprom_did);
- RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
- "EEPROM SVID = 0x%4x\n", rtlefuse->eeprom_svid);
- RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
- "EEPROM SMID = 0x%4x\n", rtlefuse->eeprom_smid);
- /*customer ID*/
- rtlefuse->eeprom_oemid = hwinfo[EEPROM_CUSTOMER_ID];
if (rtlefuse->eeprom_oemid == 0xFF)
- rtlefuse->eeprom_oemid = 0;
+ rtlefuse->eeprom_oemid = 0;
RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
"EEPROM Customer ID: 0x%2x\n", rtlefuse->eeprom_oemid);
- /*EEPROM version*/
- rtlefuse->eeprom_version = *(u16 *)&hwinfo[EEPROM_VERSION];
- /*mac address*/
- for (i = 0; i < 6; i += 2) {
- usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR + i];
- *((u16 *)(&rtlefuse->dev_addr[i])) = usvalue;
- }
-
- RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
- "dev_addr: %pM\n", rtlefuse->dev_addr);
- /*channel plan */
- rtlefuse->eeprom_channelplan = hwinfo[EEPROM_CHANNELPLAN];
/* set channel plan from efuse */
rtlefuse->channel_plan = rtlefuse->eeprom_channelplan;
/*tx power*/
@@ -1978,6 +1926,8 @@ static void _rtl88ee_read_adapter_info(struct ieee80211_hw *hw)
}
}
+exit:
+ kfree(hwinfo);
}
static void _rtl88ee_hal_customized_behavior(struct ieee80211_hw *hw)
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
