From: Jes Sorensen <Jes.Sorensen@xxxxxxxxxx>
This implements an 8192eu specific enable_rf() function. The 8192eu is
not a combo device, so no need for doing the BT specific bits needed
by the 8723bu.
Signed-off-by: Jes Sorensen <Jes.Sorensen@xxxxxxxxxx>
---
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c | 39 +++++++++++++++++++++++-
1 file changed, 38 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
index 2d92e64..a86b5c4 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
@@ -7517,6 +7517,43 @@ static void rtl8723bu_set_ps_tdma(struct rtl8xxxu_priv *priv,
}
#endif
+static void rtl8192e_enable_rf(struct rtl8xxxu_priv *priv)
+{
+ u32 val32;
+ u8 val8;
+
+ val8 = rtl8xxxu_read8(priv, REG_GPIO_MUXCFG);
+ val8 |= BIT(5);
+ rtl8xxxu_write8(priv, REG_GPIO_MUXCFG, val8);
+
+ /*
+ * WLAN action by PTA
+ */
+ rtl8xxxu_write8(priv, REG_WLAN_ACT_CONTROL_8723B, 0x04);
+
+ val32 = rtl8xxxu_read32(priv, REG_PWR_DATA);
+ val32 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN;
+ rtl8xxxu_write32(priv, REG_PWR_DATA, val32);
+
+ val32 = rtl8xxxu_read32(priv, REG_RFE_BUFFER);
+ val32 |= (BIT(0) | BIT(1));
+ rtl8xxxu_write32(priv, REG_RFE_BUFFER, val32);
+
+ rtl8xxxu_write8(priv, REG_RFE_CTRL_ANTA_SRC, 0x77);
+
+ val32 = rtl8xxxu_read32(priv, REG_LEDCFG0);
+ val32 &= ~BIT(24);
+ val32 |= BIT(23);
+ rtl8xxxu_write32(priv, REG_LEDCFG0, val32);
+
+ /*
+ * Fix external switch Main->S1, Aux->S0
+ */
+ val8 = rtl8xxxu_read8(priv, REG_PAD_CTRL1);
+ val8 &= ~BIT(0);
+ rtl8xxxu_write8(priv, REG_PAD_CTRL1, val8);
+}
+
static void rtl8723b_enable_rf(struct rtl8xxxu_priv *priv)
{
struct h2c_cmd h2c;
@@ -9953,7 +9990,7 @@ static struct rtl8xxxu_fileops rtl8192eu_fops = {
.phy_iq_calibrate = rtl8192eu_phy_iq_calibrate,
.config_channel = rtl8723bu_config_channel,
.parse_rx_desc = rtl8xxxu_parse_rxdesc24,
- .enable_rf = rtl8723b_enable_rf,
+ .enable_rf = rtl8192e_enable_rf,
.disable_rf = rtl8723b_disable_rf,
.usb_quirks = rtl8xxxu_gen2_usb_quirks,
.set_tx_power = rtl8192e_set_tx_power,
--
2.5.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
