From: Jes Sorensen <Jes.Sorensen@xxxxxxxxxx>
All the disable_rf() functions were setting REG_TXPAUSE to 0xff to
stop transmission. Do it centrally before calling disable_rf()
instead.
Signed-off-by: Jes Sorensen <Jes.Sorensen@xxxxxxxxxx>
---
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
index a86b5c4..928ca56 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
@@ -2125,8 +2125,6 @@ static void rtl8723a_disable_rf(struct rtl8xxxu_priv *priv)
u8 sps0;
u32 val32;
- rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff);
-
sps0 = rtl8xxxu_read8(priv, REG_SPS0_CTRL);
/* RF RX code for preamble power saving */
@@ -7665,8 +7663,6 @@ static void rtl8723b_disable_rf(struct rtl8xxxu_priv *priv)
{
u32 val32;
- rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff);
-
val32 = rtl8xxxu_read32(priv, REG_RX_WAIT_CCA);
val32 &= ~(BIT(22) | BIT(23));
rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, val32);
@@ -9591,6 +9587,8 @@ static void rtl8xxxu_stop(struct ieee80211_hw *hw)
if (priv->usb_interrupts)
usb_kill_anchored_urbs(&priv->int_anchor);
+ rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff);
+
priv->fops->disable_rf(priv);
/*
--
2.5.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
