On Sat, May 10, 2008 at 01:32:34PM +0200, Andrea Merello wrote: > Rtl8180: fix wrong parameter in RF code function invokation for maxim radio > > The max2820 RF code needs to invoke max2820_write_phy_antenna every time the > channel is being switch. > > This should be done passing the channel number to that function. > Incorrectly we were passing the same value that is written on the > channel RF register. > This may cause problems when operating on ch 14. > > This patch fixes it. > > Thanks to Alessandro Di Marco who found this issue! > > > signed-off-by: Andrea Merello <andreamrl@xxxxxxxxxx> > --- > > --- a/drivers/net/wireless/rtl8180_max2820.c 2008-02-02 > 14:48:52.000000000 +0100 > +++ b/drivers/net/wireless/rtl8180_max2820.c 2008-02-02 > 14:55:29.000000000 +0100 > @@ -86,7 +86,7 @@ static void max2820_rf_set_channel(struc > * sa2400, for MAXIM we do this directly from BB */ > rtl8180_write_phy(dev, 3, txpw); > > - max2820_write_phy_antenna(dev, chan); > + max2820_write_phy_antenna(dev, chan_idx + 1); > write_max2820(dev, 3, chan); > } This one didn't trigger any warnings, but it was whitespace damaged. I'll hold-off on applying this one since I presume you will be resubmitting the other patches. I'll apply them all at once then. John -- John W. Linville linville@xxxxxxxxxxxxx -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html