Kalle Valo <kvalo@xxxxxxxxxxxxxxxx> writes: > From: Yanbo Li <yanbol@xxxxxxxxxxxxxxxx> > > As not all QCA98XX radios are not connected to Bluetooth modules, enabling the > BT coex feature in firmware will have side effects if the radio's GPIO are > connected with other (non-BT) HW modules. Add debugfs file to control the > firmware BT coex logic and set the feature as disable by default to avoid that > btcoex is accidentally enabled. > > To enable this feature, execute: > > echo 1 > /sys/kernel/debug/ieee80211/phyX/ath10k/btcoex > > To disable: > > echo 0 > /sys/kernel/debug/ieee80211/phyX/ath10k/btcoex > > The firmware support this feature since 10.2.4.54 on 2G-only board, dual band > or 5G boards don't support this. The feature's name is WMI_SERVICE_COEX_GPIO > and the btcoex file is not created if firmware doesn't support it. > > Signed-off-by: Yanbo Li <yanbol@xxxxxxxxxxxxxxxx> > [kvalo@xxxxxxxxxxxxxxxx: use btcoex filename and other smaller fixes] > Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxxxx> Applied, thanks. -- Kalle Valo -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
