From: Yanbo Li <yanbol@xxxxxxxxxxxxxxxx>
As not all QCA98XX radios are not connected to Bluetooth modules, enabling the
BT coex feature in firmware will have side effects if the radio's GPIO are
connected with other (non-BT) HW modules. Add debugfs file to control the
firmware BT coex logic and set the feature as disable by default to avoid that
btcoex is accidentally enabled.
To enable this feature, execute:
echo 1 > /sys/kernel/debug/ieee80211/phyX/ath10k/btcoex
To disable:
echo 0 > /sys/kernel/debug/ieee80211/phyX/ath10k/btcoex
The firmware support this feature since 10.2.4.54 on 2G-only board, dual band
or 5G boards don't support this. The feature's name is WMI_SERVICE_COEX_GPIO
and the btcoex file is not created if firmware doesn't support it.
Signed-off-by: Yanbo Li <yanbol@xxxxxxxxxxxxxxxx>
[kvalo@xxxxxxxxxxxxxxxx: use btcoex filename and other smaller fixes]
Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxxxx>
---
v5:
* use filename btcoex to match with ath9k
* allow changing the value when interface is down
* print a reason why firmware is restarted
* only create the btcoex file if the WMI service is enabled
drivers/net/wireless/ath/ath10k/core.h | 3 ++
drivers/net/wireless/ath/ath10k/debug.c | 66 +++++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi.c | 5 ++-
3 files changed, 73 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 4a2301589902..ea10dac7c811 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -534,6 +534,9 @@ enum ath10k_dev_flags {
/* Disable HW crypto engine */
ATH10K_FLAG_HW_CRYPTO_DISABLED,
+
+ /* Bluetooth coexistance enabled */
+ ATH10K_FLAG_BTCOEX,
};
enum ath10k_cal_mode {
diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
index 6cc1aa3449c8..145c066b5087 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -2074,6 +2074,68 @@ static const struct file_operations fops_quiet_period = {
.open = simple_open
};
+static ssize_t ath10k_write_btcoex(struct file *file,
+ const char __user *ubuf,
+ size_t count, loff_t *ppos)
+{
+ struct ath10k *ar = file->private_data;
+ char buf[32];
+ size_t buf_size;
+ bool val;
+
+ buf_size = min(count, (sizeof(buf) - 1));
+ if (copy_from_user(buf, ubuf, buf_size))
+ return -EFAULT;
+
+ buf[buf_size] = '\0';
+
+ if (strtobool(buf, &val) != 0)
+ return -EINVAL;
+
+ mutex_lock(&ar->conf_mutex);
+
+ if (!(test_bit(ATH10K_FLAG_BTCOEX, &ar->dev_flags) ^ val))
+ goto exit;
+
+ if (val)
+ set_bit(ATH10K_FLAG_BTCOEX, &ar->dev_flags);
+ else
+ clear_bit(ATH10K_FLAG_BTCOEX, &ar->dev_flags);
+
+ if (ar->state != ATH10K_STATE_ON)
+ goto exit;
+
+ ath10k_info(ar, "restarting firmware due to btcoex change");
+
+ queue_work(ar->workqueue, &ar->restart_work);
+
+exit:
+ mutex_unlock(&ar->conf_mutex);
+
+ return count;
+}
+
+static ssize_t ath10k_read_btcoex(struct file *file, char __user *ubuf,
+ size_t count, loff_t *ppos)
+{
+ char buf[32];
+ struct ath10k *ar = file->private_data;
+ int len = 0;
+
+ mutex_lock(&ar->conf_mutex);
+ len = scnprintf(buf, sizeof(buf) - len, "%d\n",
+ test_bit(ATH10K_FLAG_BTCOEX, &ar->dev_flags));
+ mutex_unlock(&ar->conf_mutex);
+
+ return simple_read_from_buffer(ubuf, count, ppos, buf, len);
+}
+
+static const struct file_operations fops_btcoex = {
+ .read = ath10k_read_btcoex,
+ .write = ath10k_write_btcoex,
+ .open = simple_open
+};
+
int ath10k_debug_create(struct ath10k *ar)
{
ar->debug.fw_crash_data = vzalloc(sizeof(*ar->debug.fw_crash_data));
@@ -2183,6 +2245,10 @@ int ath10k_debug_register(struct ath10k *ar)
debugfs_create_file("tpc_stats", S_IRUSR,
ar->debug.debugfs_phy, ar, &fops_tpc_stats);
+ if (test_bit(WMI_SERVICE_COEX_GPIO, ar->wmi.svc_map))
+ debugfs_create_file("btcoex", S_IRUGO | S_IWUSR,
+ ar->debug.debugfs_phy, ar, &fops_btcoex);
+
return 0;
}
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 7569db0f69b5..5e402a24f8e7 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -5431,8 +5431,11 @@ static struct sk_buff *ath10k_wmi_10_2_op_gen_init(struct ath10k *ar)
cmd = (struct wmi_init_cmd_10_2 *)buf->data;
features = WMI_10_2_RX_BATCH_MODE;
- if (test_bit(WMI_SERVICE_COEX_GPIO, ar->wmi.svc_map))
+
+ if (test_bit(ATH10K_FLAG_BTCOEX, &ar->dev_flags) &&
+ test_bit(WMI_SERVICE_COEX_GPIO, ar->wmi.svc_map))
features |= WMI_10_2_COEX_GPIO;
+
cmd->resource_config.feature_mask = __cpu_to_le32(features);
memcpy(&cmd->resource_config.common, &config, sizeof(config));
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
