Jakub Sitnicki <jsitnicki@xxxxxxxxx> writes:
> Preparatory step for adding support for RTL8188EU chips.
>
> Signed-off-by: Jakub Sitnicki <jsitnicki@xxxxxxxxx>
> ---
> drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c | 6 ++++--
> drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 1 +
> 2 files changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
> index 83cdc2a..ecda799 100644
> --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
> +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
> @@ -4223,7 +4223,7 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
> /*
> * Start out with default power levels for channel 6, 20MHz
> */
> - rtl8723a_set_tx_power(priv, 1, false);
> + priv->fops->set_tx_power(priv, 1, false);
>
> /* Let the 8051 take control of antenna setting */
> val8 = rtl8xxxu_read8(priv, REG_LEDCFG2);
> @@ -5207,7 +5207,7 @@ static int rtl8xxxu_config(struct ieee80211_hw *hw, u32 changed)
>
> channel = hw->conf.chandef.chan->hw_value;
>
> - rtl8723a_set_tx_power(priv, channel, ht40);
> + priv->fops->set_tx_power(priv, channel, ht40);
>
> rtl8723au_config_channel(hw);
> }
> @@ -5781,6 +5781,7 @@ static struct rtl8xxxu_fileops rtl8723au_fops = {
> .parse_efuse = rtl8723au_parse_efuse,
> .load_firmware = rtl8723au_load_firmware,
> .power_on = rtl8723au_power_on,
> + .set_tx_power = rtl8723a_set_tx_power,
> .efuse_len = EFUSE_REAL_CONTENT_LEN_8723A,
> .writeN_block_size = 1024,
> };
> @@ -5789,6 +5790,7 @@ static struct rtl8xxxu_fileops rtl8192cu_fops = {
> .parse_efuse = rtl8192cu_parse_efuse,
> .load_firmware = rtl8192cu_load_firmware,
> .power_on = rtl8192cu_power_on,
> + .set_tx_power = rtl8723a_set_tx_power,
> .efuse_len = EFUSE_REAL_CONTENT_LEN_8723A,
> .writeN_block_size = 128,
> };
> diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
> index 1a767eb..427eb7e 100644
> --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
> +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
> @@ -679,6 +679,7 @@ struct rtl8xxxu_fileops {
> int (*parse_efuse) (struct rtl8xxxu_priv *priv);
> int (*load_firmware) (struct rtl8xxxu_priv *priv);
> int (*power_on) (struct rtl8xxxu_priv *priv);
> + void (*set_tx_power) (struct rtl8xxxu_priv *priv, int channel, bool ht40);
> int efuse_len;
> int writeN_block_size;
> };
Lets not add function pointers before we actually know we have a need
for them.
Jes
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
