Preparatory step for adding support for RTL8188EU chips.
Signed-off-by: Jakub Sitnicki <jsitnicki@xxxxxxxxx>
---
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c | 6 ++++--
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 1 +
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
index 83cdc2a..ecda799 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
@@ -4223,7 +4223,7 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
/*
* Start out with default power levels for channel 6, 20MHz
*/
- rtl8723a_set_tx_power(priv, 1, false);
+ priv->fops->set_tx_power(priv, 1, false);
/* Let the 8051 take control of antenna setting */
val8 = rtl8xxxu_read8(priv, REG_LEDCFG2);
@@ -5207,7 +5207,7 @@ static int rtl8xxxu_config(struct ieee80211_hw *hw, u32 changed)
channel = hw->conf.chandef.chan->hw_value;
- rtl8723a_set_tx_power(priv, channel, ht40);
+ priv->fops->set_tx_power(priv, channel, ht40);
rtl8723au_config_channel(hw);
}
@@ -5781,6 +5781,7 @@ static struct rtl8xxxu_fileops rtl8723au_fops = {
.parse_efuse = rtl8723au_parse_efuse,
.load_firmware = rtl8723au_load_firmware,
.power_on = rtl8723au_power_on,
+ .set_tx_power = rtl8723a_set_tx_power,
.efuse_len = EFUSE_REAL_CONTENT_LEN_8723A,
.writeN_block_size = 1024,
};
@@ -5789,6 +5790,7 @@ static struct rtl8xxxu_fileops rtl8192cu_fops = {
.parse_efuse = rtl8192cu_parse_efuse,
.load_firmware = rtl8192cu_load_firmware,
.power_on = rtl8192cu_power_on,
+ .set_tx_power = rtl8723a_set_tx_power,
.efuse_len = EFUSE_REAL_CONTENT_LEN_8723A,
.writeN_block_size = 128,
};
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
index 1a767eb..427eb7e 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
@@ -679,6 +679,7 @@ struct rtl8xxxu_fileops {
int (*parse_efuse) (struct rtl8xxxu_priv *priv);
int (*load_firmware) (struct rtl8xxxu_priv *priv);
int (*power_on) (struct rtl8xxxu_priv *priv);
+ void (*set_tx_power) (struct rtl8xxxu_priv *priv, int channel, bool ht40);
int efuse_len;
int writeN_block_size;
};
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
