Michal Kazior <michal.kazior@xxxxxxxxx> writes: > This adds additional 0x0041 PCI Device ID > definition to ath10k for QCA6164 which is a 1 > spatial stream sibling of the QCA6174 (which is 2 > spatial stream chip). > > The QCA6164 needs a dedicated board.bin file which > is different than the one used for QCA6174. If the > board.bin is wrong the device will crash early > while trying to boot firmware. The register dump > will look like this: > > ath10k_pci 0000:02:00.0: firmware register dump: > ath10k_pci 0000:02:00.0: [00]: 0x05010000 0x000015B3 0x000A012D 0x00955B31 > ... > > Note the value 0x000A012D. > > Special credit goes to Alan Liu > <alanliu@xxxxxxxxxxxxxxxx> for providing support > help which enabled me to come up with this patch. > > Signed-off-by: Michal Kazior <michal.kazior@xxxxxxxxx> Thanks, applied. -- Kalle Valo -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
