Raja Mani <rmani@xxxxxxxxxxxxxxxx> writes: > To enable/configure spectral scan parameters in 10.4 firmware, existing > wmi spectral related functions can be reused. Link those functions in > 10.4 wmi ops table. > > In addition, adjust bin size (only when size is 68 bytes) before reporting > bin samples to user space. The background for this adjustment is that > qca99x0 reports bin size as 68 bytes (64 bytes + 4 bytes) in report > mode 2. First 64 bytes carries in-band tones (-32 to +31) and last 4 byte > carries band edge detection data (+32) mainly used in radar detection > purpose. Additional last 4 bytes are stripped to make bin size valid one. > > This bin size adjustment will happen only for qca99x0, all other chipsets > will report proper bin sizes (64/128) without extra 4 bytes being added > at the end. The changes are validated in qca99x0 using 10.4 firmware. > > Signed-off-by: Raja Mani <rmani@xxxxxxxxxxxxxxxx> Thanks, applied. -- Kalle Valo -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
