Search Linux Wireless

Re: ath9k 4.1.2 freeze

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Pan,

I applied 736-MIPS-ath79-fix-chained-irq-disable.patch but make no difference.

Thanks,
cantona

[  238.200000] ath: phy3: rx chain 1: iq corr coeff=fffffffd
[  238.210000] ath: phy3: Doing Tx IQ Cal for chain 1
[  238.210000] ath: phy3: IQ_RES[0]=0xcf4e200e IQ_RES[1]=0xff2f
[  238.220000] ath: phy3: IQ_RES[2]=0xf3f314f4 IQ_RES[3]=0x292f
[  238.220000] ath: phy3: IQ_RES[4]=0x9cfa7001 IQ_RES[5]=0xfe32
[  238.230000] ath: phy3: chain 1: mag mismatch=0 phase mismatch=0
[  238.230000] ath: phy3: tx chain 1: mag corr=1  phase corr=-13
[  238.240000] ath: phy3: tx chain 1: iq corr coeff=f3
[  238.250000] ath: phy3: rx chain 1: mag corr=-1  phase corr=-3
[  238.250000] ath: phy3: rx chain 1: iq corr coeff=fffffffd
[  238.260000] ath: phy3: Doing Tx IQ Cal for chain 1
[  238.260000] ath: phy3: IQ_RES[0]=0xc654d011 IQ_RES[1]=0xff9f
[  238.270000] ath: phy3: IQ_RES[2]=0xf0f20561 IQ_RES[3]=0x2caf
[  238.270000] ath: phy3: IQ_RES[4]=0xd0f9dffd IQ_RES[5]=0xfe02
[  238.280000] ath: phy3: chain 1: mag mismatch=0 phase mismatch=0
[  238.280000] ath: phy3: tx chain 1: mag corr=0  phase corr=-13
[  238.290000] ath: phy3: tx chain 1: iq corr coeff=73
[  238.300000] ath: phy3: rx chain 1: mag corr=-1  phase corr=-2
[  238.300000] ath: phy3: rx chain 1: iq corr coeff=fffffffe
[  238.310000] ath: phy3: enabling IQ Calibration
[  238.310000] ath: phy3: starting IQ Mismatch Calibration
[  238.320000] ath: phy3: Enabled BB Watchdog timeout (25 ms)
[  238.320000] ath: phy3: New interrupt mask 0xf4000473
[  238.330000] ath: phy3: new IMR 0x81800175
[  238.330000] ath: phy3: macaddr: 00:1a:dd:d4:73:a0, bssid:
00:00:00:00:00:00, bssidmask: ff:ff:ff:ff:ff:ff
[  238.340000] ath: phy3: Enable MIB counters
[  238.350000] ath: phy3: Restore history: opmode 2 chan 2412 Mhz
is_scanning=0 ofdm:3 cck:2
[  238.350000] ath: phy3: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
[  238.360000] ath: phy3: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
[  238.370000] ath: phy3: New interrupt mask 0xf4000473
[  238.370000] ath: phy3: new IMR 0x81800175
[  238.370000] ath: phy3: enable IER
Freezed here--------------------

On 17 July 2015 at 17:28, Pan, Miaoqing <miaoqing@xxxxxxxxxxxxxxxx> wrote:
> +Felix
>
> Seems the new version miss two patches,
>
> Upstream: a3e6c1eff54878506b2dddcc202df9cc8180facb
> http://git.openwrt.org/?p=openwrt.git;a=blob;f=target/linux/ar71xx/patches-3.18/736-MIPS-ath79-fix-chained-irq-disable.patch;h=8cb38d3971678e3cf951d36e6ab2f4b170cd1f0c;hb=HEAD
>
> - Miaoqing
>
> -----Original Message-----
> From: Su Kang Yin [mailto:paradyse@xxxxxxxxx]
> Sent: Friday, July 17, 2015 4:36 PM
> To: linux-wireless@xxxxxxxxxxxxxxx; ath9k-devel
> Subject: Re: ath9k 4.1.2 freeze
>
> log attached
>
> On 17 July 2015 at 16:35, Su Kang Yin <paradyse@xxxxxxxxx> wrote:
>> resend
>>
>>
>> On 17 July 2015 at 16:33, Su Kang Yin <paradyse@xxxxxxxxx> wrote:
>>>
>>> Hi,
>>>
>>> Kernel 4.1.2 ath9k with atheros DB120, driver lockup on "enable IER"
>>> after AHB interface up (PCI interface is fine). No problem found on kernel 3.10.
>>>
>>> - cantona
>>>
>>> [   83.990000] ath: phy1: tx chain 1: iq corr coeff=74
>>> [   84.000000] ath: phy1: rx chain 1: mag corr=0  phase corr=-2
>>> [   84.000000] ath: phy1: rx chain 1: iq corr coeff=7e
>>> [   84.010000] ath: phy1: Doing Tx IQ Cal for chain 1
>>> [   84.010000] ath: phy1: IQ_RES[0]=0xd248900b IQ_RES[1]=0xfeff
>>> [   84.020000] ath: phy1: IQ_RES[2]=0xf0f46499 IQ_RES[3]=0x262f
>>> [   84.020000] ath: phy1: IQ_RES[4]=0x66fa9fff IQ_RES[5]=0xfe82
>>> [   84.030000] ath: phy1: chain 1: mag mismatch=0 phase mismatch=0
>>> [   84.040000] ath: phy1: tx chain 1: mag corr=0  phase corr=-13
>>> [   84.040000] ath: phy1: tx chain 1: iq corr coeff=73
>>> [   84.050000] ath: phy1: rx chain 1: mag corr=0  phase corr=-3
>>> [   84.050000] ath: phy1: rx chain 1: iq corr coeff=7d
>>> [   84.060000] ath: phy1: Doing Tx IQ Cal for chain 1
>>> [   84.060000] ath: phy1: IQ_RES[0]=0xcc4ed011 IQ_RES[1]=0xff2f
>>> [   84.070000] ath: phy1: IQ_RES[2]=0xeff334fa IQ_RES[3]=0x295f
>>> [   84.070000] ath: phy1: IQ_RES[4]=0x9bfa1ffd IQ_RES[5]=0xfe42
>>> [   84.080000] ath: phy1: chain 1: mag mismatch=0 phase mismatch=0
>>> [   84.090000] ath: phy1: tx chain 1: mag corr=0  phase corr=-14
>>> [   84.090000] ath: phy1: tx chain 1: iq corr coeff=72
>>> [   84.100000] ath: phy1: rx chain 1: mag corr=0  phase corr=-2
>>> [   84.100000] ath: phy1: rx chain 1: iq corr coeff=7e
>>> [   84.110000] ath: phy1: enabling IQ Calibration
>>> [   84.110000] ath: phy1: starting IQ Mismatch Calibration
>>> [   84.120000] ath: phy1: Enabled BB Watchdog timeout (25 ms)
>>> [   84.120000] ath: phy1: New interrupt mask 0xf4000473
>>> [   84.130000] ath: phy1: new IMR 0x81800175
>>> [   84.130000] ath: phy1: macaddr: 00:11:aa:d4:73:a0, bssid:
>>> 00:00:00:00:00:00, bssidmask: ff:ff:ff:ff:ff:ff
>>> [   84.140000] ath: phy1: Enable MIB counters
>>> [   84.150000] ath: phy1: Restore history: opmode 2 chan 2412 Mhz
>>> is_scanning=0 ofdm:3 cck:2
>>> [   84.150000] ath: phy1: **** ofdmlevel 3=>3, rssi=0[lo=7 hi=40]
>>> [   84.160000] ath: phy1: **** ccklevel 2=>2, rssi=0[lo=7 hi=40]
>>> [   84.170000] ath: phy1: New interrupt mask 0xf4000473
>>> [   84.170000] ath: phy1: new IMR 0x81800175
>>> [   84.170000] ath: phy1: enable IER
>>> =======================<FREEZE on wlan1
>>> (AHB))========================================
>>>
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux