On 06/10/2015 11:54 PM, Michal Kazior wrote:
On 10 June 2015 at 22:31, Ben Greear <greearb@xxxxxxxxxxxxxxx> wrote:
I'm trying this hostapd config file. Beacons seem OK, and station
associates. Station puts DHCP Discover on the air (using 20Mhz according
to wireshark). AP reads this, and thinks it is sending a DHCP response back,
but sniffer never shows DHCP response on the air.
Is the MSDU carrying DHCP resp completed with "ok" status? Or is it
maybe no-ack or discarded?
I'll check, and also try stock firmware to see if that makes a difference.
Kernel is 4.0.4+, ath10k firmware is CT firmware, 10.1.467 based.
I am curious if anyone else has tried to do this?
Thanks,
Ben
interface=vap50
driver=nl80211
logger_syslog=-1
logger_syslog_level=2
logger_stdout=-1
logger_stdout_level=2
ctrl_interface=/var/run/hostapd
ctrl_interface_group=0
ssid=ben-ota-2a
[...]
Works for me on c7b39fdeb479a7956a3c41638d527196ce295fdd
(github.com/kvalo/ath) with
AP: qca988x hw2.0, 10.1.467.2-1
STA: qca6174 hw2.2 (its a 2x2),
What NIC model is your qca6174? In case I cannot
get my setup to work, it would be nice to be able to be able to duplicate
your configuration...
Thanks,
Ben
--
Ben Greear <greearb@xxxxxxxxxxxxxxx>
Candela Technologies Inc http://www.candelatech.com
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
