hostapd 2.3 has no problem but i found problem that hostapd is not starting in hostapd 1.0. would you like to try testing hostapd 2.3? 2015-02-21 2:24 GMT+09:00 Mike Turner <miketurner.forum@xxxxxxxxx>: > On Fri, Feb 20, 2015 at 5:16 PM, ap420073 . <ap420073@xxxxxxxxx> wrote: >> can you tell me hostapd options and detailed situation? >> 2015-02-21 1:58 GMT+09:00 Mike Turner : > Taehee Yoo writes: > >> >> >> Sometimes rtl8192cu is not sending beacon frame. >> This patch fix this >> issue. >> >> Signed-off-by: Taehee Yoo > > > > Tried this and it doesn't >> help. Beacon transmission still isn't > consistent. Can hostapd have an >> effect on this? > > > -- > To unsubscribe from this list: send the line >> "unsubscribe linux-wireless" in > the body of a message to >> majordomo@xxxxxxxxxxxxxxx > More majordomo info at >> http://vger.kernel.org/majordomo-info.html > > hostapd.conf file here > > interface=wlan0 > driver=nl80211 > channel=3 > hw_mode=g > preamble=1 > dtim_period=2 > beacon_int=100 > logger_syslog=-1 > logger_syslog_level=0 > logger_stdout=-1 > logger_stdout_level=0 > dump_file=/tmp/hostapd.dump > ctrl_interface=/var/run/hostapd > ctrl_interface_group=0 > supported_rates=60 90 120 180 240 360 480 540 > basic_rates=60 90 120 180 240 > ssid=SSID_SETUP3 > max_num_sta=5 > macaddr_acl=0 > auth_algs=3 > ieee80211d=0 > uapsd_advertisement_enabled=1 > wep_rekey_period=0 > own_ip_addr=127.0.0.1 > wpa_group_rekey=0 > wpa_strict_rekey=0 > wpa_gmk_rekey=0 > wpa_ptk_rekey=0 > #ap_table_max_size=255 > #ap_table_expiration_time=60 > eap_server=1 > disassoc_low_ack=1 > ap_max_inactivity=4294967295 > > #WPA settings > #WPA algorithm used (WPA2 in this case) > wpa=2 > #AP password > wpa_passphrase=Ssid_WIT > #WPA key mangement type > wpa_key_mgmt=WPA-PSK > wpa_pairwise=TKIP > #encription algorithm > rsn_pairwise=CCMP > > Hostapd version 1.0 > > Atmel ARM at91sam9g25 CPU on custom designed hardware using D-link > DWA-121 USB WiFi adaptor. > > Test using '/etc/init.d/hostapd stop' and '/etc/init.d/hostapd start' > repeatedly. > Can get multiple working cycles before a failure, and can get multiple > failed cycles before correct transmission. -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
