On Fri, Feb 20, 2015 at 5:16 PM, ap420073 . <ap420073@xxxxxxxxx> wrote: > can you tell me hostapd options and detailed situation? > 2015-02-21 1:58 GMT+09:00 Mike Turner : > Taehee Yoo writes: > >> >> > Sometimes rtl8192cu is not sending beacon frame. >> This patch fix this > issue. >> >> Signed-off-by: Taehee Yoo > > > > Tried this and it doesn't > help. Beacon transmission still isn't > consistent. Can hostapd have an > effect on this? > > > -- > To unsubscribe from this list: send the line > "unsubscribe linux-wireless" in > the body of a message to > majordomo@xxxxxxxxxxxxxxx > More majordomo info at > http://vger.kernel.org/majordomo-info.html hostapd.conf file here interface=wlan0 driver=nl80211 channel=3 hw_mode=g preamble=1 dtim_period=2 beacon_int=100 logger_syslog=-1 logger_syslog_level=0 logger_stdout=-1 logger_stdout_level=0 dump_file=/tmp/hostapd.dump ctrl_interface=/var/run/hostapd ctrl_interface_group=0 supported_rates=60 90 120 180 240 360 480 540 basic_rates=60 90 120 180 240 ssid=SSID_SETUP3 max_num_sta=5 macaddr_acl=0 auth_algs=3 ieee80211d=0 uapsd_advertisement_enabled=1 wep_rekey_period=0 own_ip_addr=127.0.0.1 wpa_group_rekey=0 wpa_strict_rekey=0 wpa_gmk_rekey=0 wpa_ptk_rekey=0 #ap_table_max_size=255 #ap_table_expiration_time=60 eap_server=1 disassoc_low_ack=1 ap_max_inactivity=4294967295 #WPA settings #WPA algorithm used (WPA2 in this case) wpa=2 #AP password wpa_passphrase=Ssid_WIT #WPA key mangement type wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP #encription algorithm rsn_pairwise=CCMP Hostapd version 1.0 Atmel ARM at91sam9g25 CPU on custom designed hardware using D-link DWA-121 USB WiFi adaptor. Test using '/etc/init.d/hostapd stop' and '/etc/init.d/hostapd start' repeatedly. Can get multiple working cycles before a failure, and can get multiple failed cycles before correct transmission. -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
