Set up default configuration for the device when we call start.
The defaults come from dumps from the prima driver for the same
hardware.
This fixes transmit A-MPDU; previously only one MPDU would be
sent per A-MPDU due to missing MAX_MPDUS_IN_AMPDU setting.
Signed-off-by: Bob Copeland <me@xxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/wcn36xx/smd.c | 73 +++++++++++++++++++++++++++++++-
1 file changed, 71 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index 6398693..69ed397 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -21,6 +21,61 @@
#include <linux/bitops.h>
#include "smd.h"
+struct wcn36xx_cfg_val {
+ u32 cfg_id;
+ u32 value;
+};
+
+#define WCN36XX_CFG_VAL(id, val) \
+{ \
+ .cfg_id = WCN36XX_HAL_CFG_ ## id, \
+ .value = val \
+}
+
+static struct wcn36xx_cfg_val wcn36xx_cfg_vals[] = {
+ WCN36XX_CFG_VAL(CURRENT_TX_ANTENNA, 1),
+ WCN36XX_CFG_VAL(CURRENT_RX_ANTENNA, 1),
+ WCN36XX_CFG_VAL(LOW_GAIN_OVERRIDE, 0),
+ WCN36XX_CFG_VAL(POWER_STATE_PER_CHAIN, 785),
+ WCN36XX_CFG_VAL(CAL_PERIOD, 5),
+ WCN36XX_CFG_VAL(CAL_CONTROL, 1),
+ WCN36XX_CFG_VAL(PROXIMITY, 0),
+ WCN36XX_CFG_VAL(NETWORK_DENSITY, 3),
+ WCN36XX_CFG_VAL(MAX_MEDIUM_TIME, 6000),
+ WCN36XX_CFG_VAL(MAX_MPDUS_IN_AMPDU, 64),
+ WCN36XX_CFG_VAL(RTS_THRESHOLD, 2347),
+ WCN36XX_CFG_VAL(SHORT_RETRY_LIMIT, 6),
+ WCN36XX_CFG_VAL(LONG_RETRY_LIMIT, 6),
+ WCN36XX_CFG_VAL(FRAGMENTATION_THRESHOLD, 8000),
+ WCN36XX_CFG_VAL(DYNAMIC_THRESHOLD_ZERO, 5),
+ WCN36XX_CFG_VAL(DYNAMIC_THRESHOLD_ONE, 10),
+ WCN36XX_CFG_VAL(DYNAMIC_THRESHOLD_TWO, 15),
+ WCN36XX_CFG_VAL(FIXED_RATE, 0),
+ WCN36XX_CFG_VAL(RETRYRATE_POLICY, 4),
+ WCN36XX_CFG_VAL(RETRYRATE_SECONDARY, 0),
+ WCN36XX_CFG_VAL(RETRYRATE_TERTIARY, 0),
+ WCN36XX_CFG_VAL(FORCE_POLICY_PROTECTION, 5),
+ WCN36XX_CFG_VAL(FIXED_RATE_MULTICAST_24GHZ, 1),
+ WCN36XX_CFG_VAL(FIXED_RATE_MULTICAST_5GHZ, 5),
+ WCN36XX_CFG_VAL(DEFAULT_RATE_INDEX_5GHZ, 5),
+ WCN36XX_CFG_VAL(MAX_BA_SESSIONS, 40),
+ WCN36XX_CFG_VAL(PS_DATA_INACTIVITY_TIMEOUT, 200),
+ WCN36XX_CFG_VAL(PS_ENABLE_BCN_FILTER, 1),
+ WCN36XX_CFG_VAL(PS_ENABLE_RSSI_MONITOR, 1),
+ WCN36XX_CFG_VAL(NUM_BEACON_PER_RSSI_AVERAGE, 20),
+ WCN36XX_CFG_VAL(STATS_PERIOD, 10),
+ WCN36XX_CFG_VAL(CFP_MAX_DURATION, 30000),
+ WCN36XX_CFG_VAL(FRAME_TRANS_ENABLED, 0),
+ WCN36XX_CFG_VAL(BA_THRESHOLD_HIGH, 128),
+ WCN36XX_CFG_VAL(MAX_BA_BUFFERS, 2560),
+ WCN36XX_CFG_VAL(DYNAMIC_PS_POLL_VALUE, 0),
+ WCN36XX_CFG_VAL(TX_PWR_CTRL_ENABLE, 1),
+ WCN36XX_CFG_VAL(ENABLE_CLOSE_LOOP, 1),
+ WCN36XX_CFG_VAL(ENABLE_LPWR_IMG_TRANSITION, 0),
+ WCN36XX_CFG_VAL(MAX_ASSOC_LIMIT, 10),
+ WCN36XX_CFG_VAL(ENABLE_MCC_ADAPTIVE_SCHEDULER, 0),
+};
+
static int put_cfg_tlv_u32(struct wcn36xx *wcn, size_t *len, u32 id, u32 value)
{
struct wcn36xx_hal_cfg *entry;
@@ -357,8 +412,10 @@ static int wcn36xx_smd_start_rsp(struct wcn36xx *wcn, void *buf, size_t len)
int wcn36xx_smd_start(struct wcn36xx *wcn)
{
- struct wcn36xx_hal_mac_start_req_msg msg_body;
+ struct wcn36xx_hal_mac_start_req_msg msg_body, *body;
int ret = 0;
+ int i;
+ size_t len;
mutex_lock(&wcn->hal_mutex);
INIT_HAL_MSG(msg_body, WCN36XX_HAL_START_REQ);
@@ -368,10 +425,22 @@ int wcn36xx_smd_start(struct wcn36xx *wcn)
PREPARE_HAL_BUF(wcn->hal_buf, msg_body);
+ body = (struct wcn36xx_hal_mac_start_req_msg *)wcn->hal_buf;
+ len = body->header.len;
+
+ for (i = 0; i < ARRAY_SIZE(wcn36xx_cfg_vals); i++) {
+ ret = put_cfg_tlv_u32(wcn, &len, wcn36xx_cfg_vals[i].cfg_id,
+ wcn36xx_cfg_vals[i].value);
+ if (ret)
+ goto out;
+ }
+ body->header.len = len;
+ body->params.len = len - sizeof(*body);
+
wcn36xx_dbg(WCN36XX_DBG_HAL, "hal start type %d\n",
msg_body.params.type);
- ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len);
+ ret = wcn36xx_smd_send_and_wait(wcn, body->header.len);
if (ret) {
wcn36xx_err("Sending hal_start failed\n");
goto out;
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
