wcn36xx currently sends an incorrect sequence number into the BA session
setup firmware command: it should be saving or updating the ssn in the
TX_START ampdu_action callback instead of waiting until TX_OPERATIONAL.
However, we can sidestep the issue by letting the hardware generate the
sequence numbers for QoS frames, as is done in prima, so do that.
Signed-off-by: Bob Copeland <me@xxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/wcn36xx/txrx.c | 1 +
drivers/net/wireless/ath/wcn36xx/txrx.h | 9 ++++++++-
2 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/wcn36xx/txrx.c b/drivers/net/wireless/ath/wcn36xx/txrx.c
index f701873..277bc39 100644
--- a/drivers/net/wireless/ath/wcn36xx/txrx.c
+++ b/drivers/net/wireless/ath/wcn36xx/txrx.c
@@ -93,6 +93,7 @@ static void wcn36xx_set_tx_pdu(struct wcn36xx_tx_bd *bd,
bd->pdu.mpdu_header_off;
bd->pdu.mpdu_len = len;
bd->pdu.tid = tid;
+ bd->pdu.bd_ssn = WCN36XX_TXBD_SSN_FILL_DPU_QOS;
}
static inline struct wcn36xx_vif *get_vif_by_addr(struct wcn36xx *wcn,
diff --git a/drivers/net/wireless/ath/wcn36xx/txrx.h b/drivers/net/wireless/ath/wcn36xx/txrx.h
index bbfbcf8..032216e 100644
--- a/drivers/net/wireless/ath/wcn36xx/txrx.h
+++ b/drivers/net/wireless/ath/wcn36xx/txrx.h
@@ -32,6 +32,12 @@
#define WCN36XX_BD_RATE_MGMT 2
#define WCN36XX_BD_RATE_CTRL 3
+enum wcn36xx_txbd_ssn_type {
+ WCN36XX_TXBD_SSN_FILL_HOST = 0,
+ WCN36XX_TXBD_SSN_FILL_DPU_NON_QOS = 1,
+ WCN36XX_TXBD_SSN_FILL_DPU_QOS = 2,
+};
+
struct wcn36xx_pdu {
u32 dpu_fb:8;
u32 adu_fb:8;
@@ -50,7 +56,8 @@ struct wcn36xx_pdu {
/* 0x0c*/
u32 reserved4:8;
u32 tid:4;
- u32 reserved3:4;
+ u32 bd_ssn:2;
+ u32 reserved3:2;
u32 mpdu_len:16;
};
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
