From: Fred Chou <fred.chou.nd@xxxxxxxxx> Use rt2x00_has_cap_flag macro to check rt2x00dev->cap_flags. Signed-off-by: Fred Chou <fred.chou.nd@xxxxxxxxx> --- drivers/net/wireless/rt2x00/rt2x00config.c | 4 ++-- drivers/net/wireless/rt2x00/rt2x00dev.c | 18 +++++++++--------- drivers/net/wireless/rt2x00/rt2x00firmware.c | 2 +- drivers/net/wireless/rt2x00/rt2x00mac.c | 2 +- drivers/net/wireless/rt2x00/rt2x00queue.c | 18 +++++++++--------- drivers/net/wireless/rt2x00/rt2x00usb.c | 8 ++++---- 6 files changed, 26 insertions(+), 26 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index 1122dc4..48a2cad 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -240,7 +240,7 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, rt2x00dev->rf_channel = libconf.rf.channel; } - if (test_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags) && + if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_PS_AUTOWAKE) && (ieee80211_flags & IEEE80211_CONF_CHANGE_PS)) cancel_delayed_work_sync(&rt2x00dev->autowakeup_work); @@ -257,7 +257,7 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, rt2x00link_reset_tuner(rt2x00dev, false); if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) && - test_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags) && + rt2x00_has_cap_flag(rt2x00dev, REQUIRE_PS_AUTOWAKE) && (ieee80211_flags & IEEE80211_CONF_CHANGE_PS) && (conf->flags & IEEE80211_CONF_PS)) { beacon_diff = (long)jiffies - (long)rt2x00dev->last_beacon; diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 9967a1d..5639ed8 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -351,7 +351,7 @@ void rt2x00lib_txdone(struct queue_entry *entry, /* * Remove L2 padding which was added during */ - if (test_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags)) + if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_L2PAD)) rt2x00queue_remove_l2pad(entry->skb, header_length); /* @@ -460,7 +460,7 @@ void rt2x00lib_txdone(struct queue_entry *entry, * send the status report back. */ if (!(skbdesc_flags & SKBDESC_NOT_MAC80211)) { - if (test_bit(REQUIRE_TASKLET_CONTEXT, &rt2x00dev->cap_flags)) + if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_TASKLET_CONTEXT)) ieee80211_tx_status(rt2x00dev->hw, entry->skb); else ieee80211_tx_status_ni(rt2x00dev->hw, entry->skb); @@ -1056,9 +1056,9 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev) /* * Take TX headroom required for alignment into account. */ - if (test_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags)) + if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_L2PAD)) rt2x00dev->hw->extra_tx_headroom += RT2X00_L2PAD_SIZE; - else if (test_bit(REQUIRE_DMA, &rt2x00dev->cap_flags)) + else if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_DMA)) rt2x00dev->hw->extra_tx_headroom += RT2X00_ALIGN_SIZE; /* @@ -1069,7 +1069,7 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev) /* * Allocate tx status FIFO for driver use. */ - if (test_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags)) { + if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_TXSTATUS_FIFO)) { /* * Allocate the txstatus fifo. In the worst case the tx * status fifo has to hold the tx status of all entries @@ -1131,7 +1131,7 @@ static void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev) /* * Stop rfkill polling. */ - if (test_bit(REQUIRE_DELAYED_RFKILL, &rt2x00dev->cap_flags)) + if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_DELAYED_RFKILL)) rt2x00rfkill_unregister(rt2x00dev); /* @@ -1173,7 +1173,7 @@ static int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev) /* * Start rfkill polling. */ - if (test_bit(REQUIRE_DELAYED_RFKILL, &rt2x00dev->cap_flags)) + if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_DELAYED_RFKILL)) rt2x00rfkill_register(rt2x00dev); return 0; @@ -1389,7 +1389,7 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) /* * Start rfkill polling. */ - if (!test_bit(REQUIRE_DELAYED_RFKILL, &rt2x00dev->cap_flags)) + if (!rt2x00_has_cap_flag(rt2x00dev, REQUIRE_DELAYED_RFKILL)) rt2x00rfkill_register(rt2x00dev); return 0; @@ -1408,7 +1408,7 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev) /* * Stop rfkill polling. */ - if (!test_bit(REQUIRE_DELAYED_RFKILL, &rt2x00dev->cap_flags)) + if (!rt2x00_has_cap_flag(rt2x00dev, REQUIRE_DELAYED_RFKILL)) rt2x00rfkill_unregister(rt2x00dev); /* diff --git a/drivers/net/wireless/rt2x00/rt2x00firmware.c b/drivers/net/wireless/rt2x00/rt2x00firmware.c index fbae279..5813300 100644 --- a/drivers/net/wireless/rt2x00/rt2x00firmware.c +++ b/drivers/net/wireless/rt2x00/rt2x00firmware.c @@ -96,7 +96,7 @@ int rt2x00lib_load_firmware(struct rt2x00_dev *rt2x00dev) { int retval; - if (!test_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags)) + if (!rt2x00_has_cap_flag(rt2x00dev, REQUIRE_FIRMWARE)) return 0; if (!rt2x00dev->fw) { diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index cb40245..300876d 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -119,7 +119,7 @@ void rt2x00mac_tx(struct ieee80211_hw *hw, * Use the ATIM queue if appropriate and present. */ if (tx_info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM && - test_bit(REQUIRE_ATIM_QUEUE, &rt2x00dev->cap_flags)) + rt2x00_has_cap_flag(rt2x00dev, REQUIRE_ATIM_QUEUE)) qid = QID_ATIM; queue = rt2x00queue_get_tx_queue(rt2x00dev, qid); diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 66ff364..68b620b 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -85,7 +85,7 @@ struct sk_buff *rt2x00queue_alloc_rxskb(struct queue_entry *entry, gfp_t gfp) memset(skbdesc, 0, sizeof(*skbdesc)); skbdesc->entry = entry; - if (test_bit(REQUIRE_DMA, &rt2x00dev->cap_flags)) { + if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_DMA)) { dma_addr_t skb_dma; skb_dma = dma_map_single(rt2x00dev->dev, skb->data, skb->len, @@ -198,7 +198,7 @@ static void rt2x00queue_create_tx_descriptor_seq(struct rt2x00_dev *rt2x00dev, __set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags); - if (!test_bit(REQUIRE_SW_SEQNO, &rt2x00dev->cap_flags)) { + if (!rt2x00_has_cap_flag(rt2x00dev, REQUIRE_SW_SEQNO)) { /* * rt2800 has a H/W (or F/W) bug, device incorrectly increase * seqno on retransmited data (non-QOS) frames. To workaround @@ -484,7 +484,7 @@ static void rt2x00queue_create_tx_descriptor(struct rt2x00_dev *rt2x00dev, rt2x00crypto_create_tx_descriptor(rt2x00dev, skb, txdesc); rt2x00queue_create_tx_descriptor_seq(rt2x00dev, skb, txdesc); - if (test_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags)) + if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_HT_TX_DESC)) rt2x00queue_create_tx_descriptor_ht(rt2x00dev, skb, txdesc, sta, hwrate); else @@ -526,7 +526,7 @@ static int rt2x00queue_write_tx_data(struct queue_entry *entry, /* * Map the skb to DMA. */ - if (test_bit(REQUIRE_DMA, &rt2x00dev->cap_flags) && + if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_DMA) && rt2x00queue_map_txskb(entry)) return -ENOMEM; @@ -646,7 +646,7 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb, */ if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc.flags) && !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc.flags)) { - if (test_bit(REQUIRE_COPY_IV, &queue->rt2x00dev->cap_flags)) + if (rt2x00_has_cap_flag(queue->rt2x00dev, REQUIRE_COPY_IV)) rt2x00crypto_tx_copy_iv(skb, &txdesc); else rt2x00crypto_tx_remove_iv(skb, &txdesc); @@ -660,9 +660,9 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb, * PCI and USB devices, while header alignment only is valid * for PCI devices. */ - if (test_bit(REQUIRE_L2PAD, &queue->rt2x00dev->cap_flags)) + if (rt2x00_has_cap_flag(queue->rt2x00dev, REQUIRE_L2PAD)) rt2x00queue_insert_l2pad(skb, txdesc.header_length); - else if (test_bit(REQUIRE_DMA, &queue->rt2x00dev->cap_flags)) + else if (rt2x00_has_cap_flag(queue->rt2x00dev, REQUIRE_DMA)) rt2x00queue_align_frame(skb); /* @@ -1178,7 +1178,7 @@ int rt2x00queue_initialize(struct rt2x00_dev *rt2x00dev) if (status) goto exit; - if (test_bit(REQUIRE_ATIM_QUEUE, &rt2x00dev->cap_flags)) { + if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_ATIM_QUEUE)) { status = rt2x00queue_alloc_entries(rt2x00dev->atim); if (status) goto exit; @@ -1234,7 +1234,7 @@ int rt2x00queue_allocate(struct rt2x00_dev *rt2x00dev) struct data_queue *queue; enum data_queue_qid qid; unsigned int req_atim = - !!test_bit(REQUIRE_ATIM_QUEUE, &rt2x00dev->cap_flags); + rt2x00_has_cap_flag(rt2x00dev, REQUIRE_ATIM_QUEUE); /* * We need the following queues: diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index 892270d..7627af6 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -274,7 +274,7 @@ static void rt2x00usb_interrupt_txdone(struct urb *urb) * Schedule the delayed work for reading the TX status * from the device. */ - if (!test_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags) || + if (!rt2x00_has_cap_flag(rt2x00dev, REQUIRE_TXSTATUS_FIFO) || !kfifo_is_empty(&rt2x00dev->txstatus_fifo)) queue_work(rt2x00dev->workqueue, &rt2x00dev->txdone_work); } @@ -456,7 +456,7 @@ static bool rt2x00usb_flush_entry(struct queue_entry *entry, void *data) * Kill guardian urb (if required by driver). */ if ((entry->queue->qid == QID_BEACON) && - (test_bit(REQUIRE_BEACON_GUARD, &rt2x00dev->cap_flags))) + (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_BEACON_GUARD))) usb_kill_urb(bcn_priv->guardian_urb); return false; @@ -655,7 +655,7 @@ static int rt2x00usb_alloc_entries(struct data_queue *queue) * then we are done. */ if (queue->qid != QID_BEACON || - !test_bit(REQUIRE_BEACON_GUARD, &rt2x00dev->cap_flags)) + !rt2x00_has_cap_flag(rt2x00dev, REQUIRE_BEACON_GUARD)) return 0; for (i = 0; i < queue->limit; i++) { @@ -690,7 +690,7 @@ static void rt2x00usb_free_entries(struct data_queue *queue) * then we are done. */ if (queue->qid != QID_BEACON || - !test_bit(REQUIRE_BEACON_GUARD, &rt2x00dev->cap_flags)) + !rt2x00_has_cap_flag(rt2x00dev, REQUIRE_BEACON_GUARD)) return; for (i = 0; i < queue->limit; i++) { -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html