On Thu, Oct 23, 2014 at 12:53 AM, Laurențiu Nicola <lnicola@xxxxxxx> wrote: > Nope. It seems that code doesn't get executed when my issue occurs (or > in my five or ten minutes of uptime). I've seen > `ieee80211_reset_ap_probe` get called by `ieee80211_rx_mgmt_probe_resp`, > but (if I'm not wrong) not on every disconnect. > > And as far as I can tell, force_cam is set to true. Can you please try with the patch attached and send the logs? I again need MAC80211_MLME_DEBUG. Thanks. > > Laurentiu > > On Wed, Oct 22, 2014, at 12:10, Emmanuel Grumbach wrote: >> On Tue, Oct 21, 2014 at 10:56 PM, Laurențiu Nicola <lnicola@xxxxxxx> >> wrote: >> > Yep! `scb_timeout` is 60 on my router. >> > >> > On Tue, Oct 21, 2014, at 14:00, poma wrote: >> >> On 21.10.2014 10:35, Felix Fietkau wrote: >> >> > On 2014-10-21 10:23, Laurențiu Nicola wrote: >> >> >> It's an ASUS RT-N66U running NEWD-2/K3X from r24160. >> >> > This is a Broadcom based device, so it should behave in the same way as >> >> > other APs/Routers running the Broadcom drivers. >> >> > The driver should only send Reason 7 when receiving a PS-Poll, BlockAck, >> >> > BlockAckReq or Action frame from a station that's not associated, so >> >> > probably it has already kicked out your iwlwifi client earlier. Not sure >> >> > why that doesn't show up in the log though. >> >> > >> >> >> >> Whether this might refer to the Station Control Block Timeout value >> >> >> >> http://www.dd-wrt.com/wiki/index.php/Wl#scb_timeout >> >> ... >> >> scb_timeout >> >> >> >> AP only: inactivity timeout value for authenticated stas >> >> >> >> Actually, mac80211 should be probing the AP every 30 seconds but a >> beacon might abort the probe... >> Can you try something like this: >> >> diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c >> index 75df184..c9db7cf 100644 >> --- a/net/mac80211/mlme.c >> +++ b/net/mac80211/mlme.c >> @@ -3295,7 +3295,8 @@ static void ieee80211_rx_mgmt_beacon(struct >> ieee80211_sub_if_data *sdata, >> if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) { >> mlme_dbg_ratelimited(sdata, >> "cancelling AP probe due to a >> received beacon\n"); >> - ieee80211_reset_ap_probe(sdata); >> + pr_err("Not cancelling the probe to make sure the AP >> hears us from time to time\n"); >> + //ieee80211_reset_ap_probe(sdata); >> } >> >> /* >> >> >> >> >> >> >> poma >> >> >> >> >> >> -- >> >> To unsubscribe from this list: send the line "unsubscribe linux-wireless" >> >> in >> >> the body of a message to majordomo@xxxxxxxxxxxxxxx >> >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-wireless" >> in >> the body of a message to majordomo@xxxxxxxxxxxxxxx >> More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
