Search Linux Wireless

Re: [PATCH] brcmfmac: BRCMFMAC should depend on HAS_DMA

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/01/14 10:44, Geert Uytterhoeven wrote:
Hi Arend,

On Mon, Sep 1, 2014 at 10:21 AM, Arend van Spriel<arend@xxxxxxxxxxxx>  wrote:
   config BRCMFMAC
         tristate "Broadcom IEEE802.11n embedded FullMAC WLAN driver"
-       depends on CFG80211
+       depends on CFG80211A&&   HAS_DMA

Not sure what happened here, but CFG80211 kconfig option did was not renamed
as far as I know. Anyway, I would like to propose a different solution. Will

Oops, that was me typing the vim append-command twice :-(
Thanks for noticing!

get back to you when I have it ready.

OK. Thanks again!

Hi Geert,

I added Kconfig options for the proto layer which are selected by the host interface selection. So the HAS_DMA dependency is checked for BRCMFMAC_PCIE. I am wondering whether GENERIC_IO should also be checked.

Can you verify the patch below works with your configuration?

Regards,
Arend
---
diff --git a/drivers/net/wireless/brcm80211/Kconfig b/drivers/net/wireless/brcm80211/Kconfig
index b8e2561..fe3dc12 100644
--- a/drivers/net/wireless/brcm80211/Kconfig
+++ b/drivers/net/wireless/brcm80211/Kconfig
@@ -27,10 +27,17 @@ config BRCMFMAC
 	  one of the bus interface support. If you choose to build a module,
 	  it'll be called brcmfmac.ko.

+config BRCMFMAC_PROTO_BCDC
+	bool
+
+config BRCMFMAC_PROTO_MSGBUF
+	bool
+
 config BRCMFMAC_SDIO
 	bool "SDIO bus interface support for FullMAC driver"
 	depends on (MMC = y || MMC = BRCMFMAC)
 	depends on BRCMFMAC
+	select BRCMFMAC_PROTO_BCDC
 	select FW_LOADER
 	default y
 	---help---
@@ -42,6 +49,7 @@ config BRCMFMAC_USB
 	bool "USB bus interface support for FullMAC driver"
 	depends on (USB = y || USB = BRCMFMAC)
 	depends on BRCMFMAC
+	select BRCMFMAC_PROTO_BCDC
 	select FW_LOADER
 	---help---
 	  This option enables the USB bus interface support for Broadcom
@@ -52,6 +60,8 @@ config BRCMFMAC_PCIE
 	bool "PCIE bus interface support for FullMAC driver"
 	depends on BRCMFMAC
 	depends on PCI
+	depends on HAS_DMA
+	select BRCMFMAC_PROTO_MSGBUF
 	select FW_LOADER
 	---help---
 	  This option enables the PCIE bus interface support for Broadcom
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/Makefile b/drivers/net/wireless/brcm80211/brcmfmac/Makefile
index c35adf4..90a977f 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/Makefile
+++ b/drivers/net/wireless/brcm80211/brcmfmac/Makefile
@@ -30,16 +30,18 @@ brcmfmac-objs += \
 		fwsignal.o \
 		p2p.o \
 		proto.o \
-		bcdc.o \
-		commonring.o \
-		flowring.o \
-		msgbuf.o \
 		dhd_common.o \
 		dhd_linux.o \
 		firmware.o \
 		feature.o \
 		btcoex.o \
 		vendor.o
+brcmfmac-$(CONFIG_BRCMFMAC_PROTO_BCDC) += \
+		bcdc.o
+brcmfmac-$(CONFIG_BRCMFMAC_PROTO_MSGBUF) += \
+		commonring.o \
+		flowring.o \
+		msgbuf.o
 brcmfmac-$(CONFIG_BRCMFMAC_SDIO) += \
 		dhd_sdio.o \
 		bcmsdh.o
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcdc.h b/drivers/net/wireless/brcm80211/brcmfmac/bcdc.h
index 17e8c03..6003179 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcdc.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcdc.h
@@ -16,9 +16,12 @@
 #ifndef BRCMFMAC_BCDC_H
 #define BRCMFMAC_BCDC_H

-
+#ifdef CONFIG_BRCMFMAC_PROTO_BCDC
 int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr);
 void brcmf_proto_bcdc_detach(struct brcmf_pub *drvr);
-
+#else
+static inline int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr) { return 0; }
+static inline void brcmf_proto_bcdc_detach(struct brcmf_pub *drvr) {}
+#endif

 #endif /* BRCMFMAC_BCDC_H */
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.h b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.h
index f901ae5..e6395ee 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.h
@@ -32,9 +32,16 @@


 int brcmf_proto_msgbuf_rx_trigger(struct device *dev);
+void brcmf_msgbuf_delete_flowring(struct brcmf_pub *drvr, u8 flowid);
+#ifdef CONFIG_BRCMFMAC_PROTO_MSGBUF
 int brcmf_proto_msgbuf_attach(struct brcmf_pub *drvr);
 void brcmf_proto_msgbuf_detach(struct brcmf_pub *drvr);
-void brcmf_msgbuf_delete_flowring(struct brcmf_pub *drvr, u8 flowid);
-
+#else
+static inline int brcmf_proto_msgbuf_attach(struct brcmf_pub *drvr)
+{
+	return 0;
+}
+static inline void brcmf_proto_msgbuf_detach(struct brcmf_pub *drvr) {}
+#endif

 #endif /* BRCMFMAC_MSGBUF_H */
Gr{oetje,eeting}s,

                         Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                 -- Linus Torvalds

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux