From: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
If a station interface is already assigned to a context
and is active and a second interface of type AP is added,
then beaconing on the new interface has to be begin only
after the BSS_CHANGED_BEACON_ENABLED flag is sent by mac80211
to the driver.
But, since we issue ATH_CHANCTX_EVENT_ENABLE_MULTICHANNEL as soon
as a new channel context is added, a switch occurs almost immediately
before BSS_CHANGED_BEACON_ENABLED is received. When a HW reset
is done for the new context, beacons are enabled for the
interface since "enable_beacon" in the BSS config maintained
in mac80211 is true - but the driver hasn't been notified yet.
This causes a panic, since the beacon interval is zero for this
interface and ath9k_cmn_beacon_config_ap() doesn't have a safety check.
Fix this panic by checking if the beacon params has been cached
for this context and use the "enable_beacon" flag maintained
locally in the driver. Also, recalculate the summary data
after the beacon params have been cached when BSS_CHANGED_BEACON_ENABLED
is received.
Signed-off-by: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/main.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 0b3d4d8..2333776 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -916,8 +916,6 @@ static void ath9k_vif_iter(struct ath9k_vif_iter_data *iter_data,
switch (vif->type) {
case NL80211_IFTYPE_AP:
iter_data->naps++;
- if (vif->bss_conf.enable_beacon)
- iter_data->beacons = true;
break;
case NL80211_IFTYPE_STATION:
iter_data->nstations++;
@@ -1021,6 +1019,7 @@ void ath9k_calculate_summary_state(struct ath_softc *sc,
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ath9k_vif_iter_data iter_data;
+ struct ath_beacon_config *cur_conf;
ath_chanctx_check_active(sc, ctx);
@@ -1037,8 +1036,11 @@ void ath9k_calculate_summary_state(struct ath_softc *sc,
ath_hw_setbssidmask(common);
if (iter_data.naps > 0) {
+ cur_conf = &ctx->beacon;
ath9k_hw_set_tsfadjust(ah, true);
ah->opmode = NL80211_IFTYPE_AP;
+ if (cur_conf->enable_beacon)
+ iter_data.beacons = true;
} else {
ath9k_hw_set_tsfadjust(ah, false);
@@ -1695,9 +1697,9 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
if ((changed & BSS_CHANGED_BEACON_ENABLED) ||
(changed & BSS_CHANGED_BEACON_INT) ||
(changed & BSS_CHANGED_BEACON_INFO)) {
+ ath9k_beacon_config(sc, vif, changed);
if (changed & BSS_CHANGED_BEACON_ENABLED)
ath9k_calculate_summary_state(sc, avp->chanctx);
- ath9k_beacon_config(sc, vif, changed);
}
if ((avp->chanctx == sc->cur_chan) &&
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
