On 20 August 2014 15:41, Daniel Mack <daniel@xxxxxxxxxx> wrote: > Hi, > > I'm currently updating the kernel of a PXA3xx platform that used to be > bases on 3.0. On that, a libertas is connected to the PXA mci controller > via SDIO. > > The card itself works fine on both the old version and 3.16, but on > 3.16, I see the following error when trying to put the system to suspend: > > [ 13.459502] mmc0: new SDIO card at address 0001 > [ 15.103333] libertas_sdio: Libertas SDIO driver > [ 15.107864] libertas_sdio: Copyright Pierre Ossman > [ 15.660291] libertas_sdio mmc0:0001:1 (unregistered net_device): > 00:19:88:21:f6:22, fw 9.70.20p0, cap 0x00000303 > [ 15.675960] libertas_sdio mmc0:0001:1 wlan0: Marvell WLAN 802.11 adapter > [ 15.684075] cfg80211: Calling CRDA to update world regulatory domain > > # echo mem >/sys/power/state > [ 18.617456] PM: Syncing filesystems ... done. > [ 18.634231] Freezing user space processes ... (elapsed 0.000 seconds) > done. > [ 18.641312] Freezing remaining freezable tasks ... (elapsed 0.007 > seconds) done. > [ 18.658322] dpm_run_callback(): pm_generic_suspend+0x0/0x38 returns -38 > [ 18.665136] PM: Device mmc0:0001:1 failed to suspend: error -38 > [ 18.671035] PM: Some devices failed to suspend, or early wake event > detected > > > The problem is caused by libertas' if_sdio_suspend() returning -ENOSYS here: > > /* If we're powered off anyway, just let the mmc layer remove the > * card. */ > if (!lbs_iface_active(card->priv)) > return -ENOSYS; This has changed. All sdio func driver's must not return an error code from it's ->suspend callback, unless it actually found an error and thus want to prevent suspend. What's important for sdio func drivers is to flush any outstanding requests and prevent further request from being sent using the SDIO API. At resume, those shall start to allow requests again. I thought I sent a patches for the few affected sdio drivers that needed to adopt, but it seems like I missed it, sorry! I will have a look at it the next few days, appreciate if you are able to help out testing, I don't have any HW using libertas_sdio. Kind regards Uffe > > > According to the comment, the code assumes the function is called from > the mmc layer, which isn't the case - the stack trace leading to this > function looks like this: > > [ 15.767603] [<bf019048>] (if_sdio_suspend [libertas_sdio]) from > [<c0285980>] (pm_generic_suspend+0x2c/0x38) > [ 15.779843] [<c0285980>] (pm_generic_suspend) from [<c0286c1c>] > (dpm_run_callback.isra.21+0x18/0x44) > [ 15.790863] [<c0286c1c>] (dpm_run_callback.isra.21) from [<c0287cdc>] > (__device_suspend+0x148/0x220) > [ 15.800039] [<c0287cdc>] (__device_suspend) from [<c0288478>] > (dpm_suspend+0xa8/0x204) > [ 15.808464] [<c0288478>] (dpm_suspend) from [<c00410c8>] > (suspend_devices_and_enter+0x3c/0x300) > [ 15.817858] [<c00410c8>] (suspend_devices_and_enter) from > [<c0041458>] (pm_suspend+0xcc/0x1b0) > [ 15.827037] [<c0041458>] (pm_suspend) from [<c0040360>] > (state_store+0xb8/0xdc) > [ 15.834678] [<c0040360>] (state_store) from [<c022891c>] > (kobj_attr_store+0x14/0x20) > [ 15.842664] [<c022891c>] (kobj_attr_store) from [<c00ebcc0>] > (sysfs_kf_write+0x3c/0x48) > [ 15.851209] [<c00ebcc0>] (sysfs_kf_write) from [<c00eaed8>] > (kernfs_fop_write+0x100/0x158) > [ 15.860039] [<c00eaed8>] (kernfs_fop_write) from [<c009766c>] > (vfs_write+0xb4/0x188) > [ 15.868335] [<c009766c>] (vfs_write) from [<c0097bec>] > (SyS_write+0x3c/0x7c) > [ 15.875949] [<c0097bec>] (SyS_write) from [<c00092e0>] > (ret_fast_syscall+0x0/0x2c) > > > Bisecting is tricky due to other details unfortunately. > > Any ideas? > > > Thanks, > Daniel > -- > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
