On Sat, 16 Aug 2014 20:27:01 -0700, Hugh Dickins said:
> Can we safely revert your 8b37e1bef5a6 ("leds: convert blink timer to
> workqueue"), or have there been other changes which now depend upon it?
I suspect there's something else busted. I hand-reverted that patch, and I *still*
see the following lockdep whine that looks related (as it talks about
leddev_list_lock). next-0811 was OK, looks like next-0815 and -0818 had this....
[ 2.473044] iTCO_vendor_support: vendor-support=0
[ 2.473122] device-mapper: uevent: version 1.0.3
[ 2.473145] =============================================
[ 2.473177] [ INFO: possible recursive locking detected ]
[ 2.473204] 3.17.0-rc1-next-20140818-dirty #274 Not tainted
[ 2.473231] ---------------------------------------------
[ 2.473258] kworker/3:0/25 is trying to acquire lock:
[ 2.473283] (&trig->leddev_list_lock){.+.?..}, at: [<ffffffff9344da1b>] led_trigger_event+0x26/0x69
[ 2.473341]
but task is already holding lock:
[ 2.473370] (&trig->leddev_list_lock){.+.?..}, at: [<ffffffff9344da1b>] led_trigger_event+0x26/0x69
[ 2.473425]
other info that might help us debug this:
[ 2.473456] Possible unsafe locking scenario:
[ 2.473485] CPU0
[ 2.473498] ----
[ 2.473511] lock(&trig->leddev_list_lock);
[ 2.473538] lock(&trig->leddev_list_lock);
[ 2.473565]
*** DEADLOCK ***
[ 2.473594] May be due to missing lock nesting notation
[ 2.473626] 11 locks held by kworker/3:0/25:
[ 2.473648] #0: ("events_long"){.+.+.+}, at: [<ffffffff93054594>] process_one_work+0x1e9/0x4ad
[ 2.473704] #1: (serio_event_work){+.+.+.}, at: [<ffffffff93054594>] process_one_work+0x1e9/0x4ad
[ 2.473760] #2: (serio_mutex){+.+.+.}, at: [<ffffffff933dd7f0>] serio_handle_event+0x19/0x19c
[ 2.473816] #3: (&dev->mutex){......}, at: [<ffffffff9332cec3>] __driver_attach+0x2f/0x7e
[ 2.473869] #4: (&dev->mutex){......}, at: [<ffffffff9332cedb>] __driver_attach+0x47/0x7e
[ 2.473922] #5: (&serio->drv_mutex){+.+.+.}, at: [<ffffffff933dca77>] serio_connect_driver+0x21/0x42
[ 2.473980] #6: (input_mutex){+.+.+.}, at: [<ffffffff933e183a>] input_register_device+0x2a9/0x381
[ 2.474036] #7: (vt_led_registered_lock){+.+.+.}, at: [<ffffffff933e3846>] input_led_connect+0x49/0x1cd
[ 2.474095] #8: (triggers_list_lock){++++.+}, at: [<ffffffff9344dd91>] led_trigger_set_default+0x27/0x87
[ 2.474154] #9: (&led_cdev->trigger_lock){+.+.+.}, at: [<ffffffff9344dd99>] led_trigger_set_default+0x2f/0x87
[ 2.474214] #10: (&trig->leddev_list_lock){.+.?..}, at: [<ffffffff9344da1b>] led_trigger_event+0x26/0x69
[ 2.474274]
stack backtrace:
[ 2.474297] CPU: 3 PID: 25 Comm: kworker/3:0 Not tainted 3.17.0-rc1-next-20140818-dirty #274
[ 2.474338] Hardware name: Dell Inc. Latitude E6530/07Y85M, BIOS A15 06/20/2014
[ 2.474374] Workqueue: events_long serio_handle_event
[ 2.474401] 0000000000000000 ffff880224ceb960 ffffffff9368ba02 ffffffff945ff130
[ 2.474447] ffffffff945ff130 ffff880224ceba20 ffffffff9307b730 0000000a00000246
[ 2.474492] 0000000000000000 ffffffff945ff130 ffffffff00000003 23605381dcae248d
[ 2.474538] Call Trace:
[ 2.474554] [<ffffffff9368ba02>] dump_stack+0x51/0xaa
[ 2.474581] [<ffffffff9307b730>] __lock_acquire+0xd22/0xed1
[ 2.474611] [<ffffffff9307b09a>] ? __lock_acquire+0x68c/0xed1
[ 2.474641] [<ffffffff9344da1b>] ? led_trigger_event+0x26/0x69
[ 2.474671] [<ffffffff9307bc64>] lock_acquire+0xdd/0x16a
[ 2.474699] [<ffffffff9307bc64>] ? lock_acquire+0xdd/0x16a
[ 2.474727] [<ffffffff9344da1b>] ? led_trigger_event+0x26/0x69
[ 2.474758] [<ffffffff93696391>] _raw_read_lock+0x30/0x3f
[ 2.474786] [<ffffffff9344da1b>] ? led_trigger_event+0x26/0x69
[ 2.474816] [<ffffffff9344da1b>] led_trigger_event+0x26/0x69
[ 2.474846] [<ffffffff933e3751>] vt_led_set+0x32/0x34
[ 2.474873] [<ffffffff9344d312>] __led_set_brightness+0x1b/0x1d
[ 2.474904] [<ffffffff9344d4a8>] led_set_brightness+0x37/0x39
[ 2.474934] [<ffffffff9344da3d>] led_trigger_event+0x48/0x69
[ 2.474965] [<ffffffff9330b7fb>] kbd_ledstate_trigger_activate+0x47/0x4f
[ 2.474999] [<ffffffff9344dbda>] led_trigger_set+0xfd/0x139
[ 2.475028] [<ffffffff9344ddcc>] led_trigger_set_default+0x62/0x87
[ 2.475061] [<ffffffff9344d87e>] led_classdev_register+0x139/0x144
[ 2.475093] [<ffffffff933e3887>] input_led_connect+0x8a/0x1cd
[ 2.475123] [<ffffffff933e1901>] input_register_device+0x370/0x381
[ 2.475154] [<ffffffff933e848f>] atkbd_connect+0x216/0x269
[ 2.475182] [<ffffffff933dca82>] serio_connect_driver+0x2c/0x42
[ 2.475213] [<ffffffff933dcab3>] serio_driver_probe+0x1b/0x1d
[ 2.476508] [<ffffffff9332cd33>] driver_probe_device+0xda/0x203
[ 2.477797] [<ffffffff9332cef0>] __driver_attach+0x5c/0x7e
[ 2.479081] [<ffffffff9332ce94>] ? __device_attach+0x38/0x38
[ 2.480328] [<ffffffff9332b3bb>] bus_for_each_dev+0x6a/0x82
[ 2.481604] [<ffffffff9332c87d>] driver_attach+0x19/0x1b
[ 2.482874] [<ffffffff933dd92d>] serio_handle_event+0x156/0x19c
[ 2.483387] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.485373] [<ffffffff93054636>] process_one_work+0x28b/0x4ad
[ 2.485976] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 2.485979] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 2.485982] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.486523] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 2.489121] ata1.00: ATA-8: ST500LX003-1AC15G, DEM4, max UDMA/133
[ 2.489123] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.492676] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 2.492678] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 2.492681] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.493213] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 2.495797] ata1.00: configured for UDMA/133
[ 2.497541] scsi 0:0:0:0: Direct-Access ATA ST500LX003-1AC15 DEM4 PQ: 0 ANSI: 5
[ 2.498023] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.498026] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.498169] sd 0:0:0:0: [sda] Write Protect is off
[ 2.498172] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.498231] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.505326] sda: sda1 sda2 sda3
[ 2.506172] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.511495] [<ffffffff93054bd3>] worker_thread+0x351/0x46a
[ 2.512855] [<ffffffff93054882>] ? process_scheduled_works+0x2a/0x2a
[ 2.514195] [<ffffffff9305967e>] kthread+0xd6/0xde
[ 2.515521] [<ffffffff930595a8>] ? __kthread_parkme+0x62/0x62
[ 2.516814] [<ffffffff93696dac>] ret_from_fork+0x7c/0xb0
[ 2.518095] [<ffffffff930595a8>] ? __kthread_parkme+0x62/0x62
[ 2.519527] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@xxxxxxxxxx
[ 2.520836] Intel P-state driver initializing.
(Looks like the lockdep output got intermixed with ata spinning up my disk)
Attachment:
pgpySGBlduseO.pgp
Description: PGP signature
