Signed-off-by: Rafał Miłecki <zajec5@xxxxxxxxx>
---
drivers/net/wireless/b43/phy_common.c | 6 ------
drivers/net/wireless/b43/phy_common.h | 3 ---
drivers/net/wireless/b43/phy_n.c | 11 +++++++----
drivers/net/wireless/b43/tables_nphy.c | 2 +-
4 files changed, 8 insertions(+), 14 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c
index e7e8383..2d05b59 100644
--- a/drivers/net/wireless/b43/phy_common.c
+++ b/drivers/net/wireless/b43/phy_common.c
@@ -547,12 +547,6 @@ void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on)
}
-bool b43_channel_type_is_40mhz(enum nl80211_channel_type channel_type)
-{
- return (channel_type == NL80211_CHAN_HT40MINUS ||
- channel_type == NL80211_CHAN_HT40PLUS);
-}
-
bool b43_is_40mhz(struct b43_wldev *dev)
{
return dev->phy.chandef->width == NL80211_CHAN_WIDTH_40;
diff --git a/drivers/net/wireless/b43/phy_common.h b/drivers/net/wireless/b43/phy_common.h
index 674422f..3912274 100644
--- a/drivers/net/wireless/b43/phy_common.h
+++ b/drivers/net/wireless/b43/phy_common.h
@@ -266,7 +266,6 @@ struct b43_phy {
/* Current channel */
struct cfg80211_chan_def *chandef;
unsigned int channel;
- enum nl80211_channel_type channel_type;
/* PHY TX errors counter. */
atomic_t txerr_cnt;
@@ -447,8 +446,6 @@ int b43_phy_shm_tssi_read(struct b43_wldev *dev, u16 shm_offset);
*/
void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on);
-bool b43_channel_type_is_40mhz(enum nl80211_channel_type channel_type);
-
bool b43_is_40mhz(struct b43_wldev *dev);
void b43_phy_force_clock(struct b43_wldev *dev, bool force);
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index dc12493..6398c7e 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -4504,7 +4504,8 @@ static void b43_nphy_save_cal(struct b43_wldev *dev)
txcal_radio_regs[3] = b43_radio_read(dev, 0xBC);
}
iqcal_chanspec->center_freq = dev->phy.chandef->chan->center_freq;
- iqcal_chanspec->channel_type = dev->phy.channel_type;
+ iqcal_chanspec->channel_type =
+ cfg80211_get_chandef_type(dev->phy.chandef);
b43_ntab_read_bulk(dev, B43_NTAB16(15, 80), 8, table);
if (nphy->hang_avoid)
@@ -4779,7 +4780,7 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
nphy->txiqlocal_chanspec.center_freq =
phy->chandef->chan->center_freq;
nphy->txiqlocal_chanspec.channel_type =
- dev->phy.channel_type;
+ cfg80211_get_chandef_type(phy->chandef);
} else {
length = 11;
if (dev->phy.rev < 3)
@@ -4816,7 +4817,7 @@ static void b43_nphy_reapply_tx_cal_coeffs(struct b43_wldev *dev)
if (!nphy->txiqlocal_coeffsvalid ||
nphy->txiqlocal_chanspec.center_freq != dev->phy.chandef->chan->center_freq ||
- nphy->txiqlocal_chanspec.channel_type != dev->phy.channel_type)
+ nphy->txiqlocal_chanspec.channel_type != cfg80211_get_chandef_type(dev->phy.chandef))
return;
b43_ntab_read_bulk(dev, B43_NTAB16(15, 80), 7, buffer);
@@ -5441,7 +5442,7 @@ static void b43_nphy_channel_setup(struct b43_wldev *dev,
bool avoid = false;
if (dev->phy.n->spur_avoid == B43_SPUR_AVOID_FORCE) {
avoid = true;
- } else if (!b43_channel_type_is_40mhz(phy->channel_type)) {
+ } else if (!b43_is_40mhz(dev)) {
if ((ch >= 5 && ch <= 8) || ch == 13 || ch == 14)
avoid = true;
} else { /* 40MHz */
@@ -5507,9 +5508,11 @@ static int b43_nphy_set_channel(struct b43_wldev *dev,
own to let this function's subcalls work properly. */
phy->channel = channel->hw_value;
+#if 0
if (b43_channel_type_is_40mhz(phy->channel_type) !=
b43_channel_type_is_40mhz(channel_type))
; /* TODO: BMAC BW Set (channel_type) */
+#endif
if (channel_type == NL80211_CHAN_HT40PLUS)
b43_phy_set(dev, B43_NPHY_RXCTL,
diff --git a/drivers/net/wireless/b43/tables_nphy.c b/drivers/net/wireless/b43/tables_nphy.c
index 4047c05..b221715 100644
--- a/drivers/net/wireless/b43/tables_nphy.c
+++ b/drivers/net/wireless/b43/tables_nphy.c
@@ -3191,7 +3191,7 @@ struct nphy_gain_ctl_workaround_entry *b43_nphy_get_gain_ctl_workaround_ent(
/* Some workarounds to the workarounds... */
if (ghz5 && dev->phy.rev >= 6) {
if (dev->phy.radio_rev == 11 &&
- !b43_channel_type_is_40mhz(dev->phy.channel_type))
+ !b43_is_40mhz(dev))
e->cliplo_gain = 0x2d;
} else if (!ghz5 && dev->phy.rev >= 5) {
static const int gain_data[] = {0x0062, 0x0064, 0x006a, 0x106a,
--
1.8.4.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
