Signed-off-by: Rafał Miłecki <zajec5@xxxxxxxxx>
---
drivers/net/wireless/b43/phy_common.h | 1 -
drivers/net/wireless/b43/phy_ht.c | 2 +-
drivers/net/wireless/b43/phy_n.c | 24 ++++++++++++++----------
3 files changed, 15 insertions(+), 12 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_common.h b/drivers/net/wireless/b43/phy_common.h
index 56dfe7a..3990820 100644
--- a/drivers/net/wireless/b43/phy_common.h
+++ b/drivers/net/wireless/b43/phy_common.h
@@ -269,7 +269,6 @@ struct b43_phy {
/* Current channel */
struct cfg80211_chan_def *chandef;
unsigned int channel;
- u16 channel_freq;
enum nl80211_channel_type channel_type;
/* PHY TX errors counter. */
diff --git a/drivers/net/wireless/b43/phy_ht.c b/drivers/net/wireless/b43/phy_ht.c
index 5d6833f..f2974c6 100644
--- a/drivers/net/wireless/b43/phy_ht.c
+++ b/drivers/net/wireless/b43/phy_ht.c
@@ -596,7 +596,7 @@ static void b43_phy_ht_tx_power_ctl_setup(struct b43_wldev *dev)
u8 target[3];
s16 a1[3], b0[3], b1[3];
- u16 freq = dev->phy.channel_freq;
+ u16 freq = dev->phy.chandef->chan->center_freq;
int i, c;
if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 86569f6..dc62f02 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -798,6 +798,7 @@ static void b43_chantab_radio_2056_upload(struct b43_wldev *dev,
static void b43_radio_2056_setup(struct b43_wldev *dev,
const struct b43_nphy_channeltab_entry_rev3 *e)
{
+ struct b43_phy *phy = &dev->phy;
struct ssb_sprom *sprom = dev->dev->bus_sprom;
enum ieee80211_band band = b43_current_band(dev->wl);
u16 offset;
@@ -909,7 +910,7 @@ static void b43_radio_2056_setup(struct b43_wldev *dev,
b43_radio_write(dev, offset | B2056_TX_PA_SPARE1, 0xee);
}
} else if (dev->phy.n->ipa5g_on && band == IEEE80211_BAND_5GHZ) {
- u16 freq = dev->phy.channel_freq;
+ u16 freq = phy->chandef->chan->center_freq;
if (freq < 5100) {
paa_boost = 0xA;
pada_boost = 0x77;
@@ -1675,6 +1676,7 @@ static int b43_nphy_poll_rssi(struct b43_wldev *dev, enum n_rssi_type rssi_type,
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RSSICalRev3 */
static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev)
{
+ struct b43_phy *phy = &dev->phy;
struct b43_phy_n *nphy = dev->phy.n;
u16 saved_regs_phy_rfctl[2];
@@ -1897,9 +1899,9 @@ static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev)
/* Remember for which channel we store configuration */
if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
- nphy->rssical_chanspec_2G.center_freq = dev->phy.channel_freq;
+ nphy->rssical_chanspec_2G.center_freq = phy->chandef->chan->center_freq;
else
- nphy->rssical_chanspec_5G.center_freq = dev->phy.channel_freq;
+ nphy->rssical_chanspec_5G.center_freq = phy->chandef->chan->center_freq;
/* End of calibration, restore configuration */
b43_nphy_classifier(dev, 7, class);
@@ -2528,7 +2530,7 @@ static void b43_nphy_workarounds_rev7plus(struct b43_wldev *dev)
}
}
} else {
- u16 freq = phy->channel_freq;
+ u16 freq = phy->chandef->chan->center_freq;
if ((freq >= 5180 && freq <= 5230) ||
(freq >= 5745 && freq <= 5805)) {
b43_radio_write(dev, 0x7D, 0xFF);
@@ -3184,12 +3186,13 @@ static void b43_nphy_tx_power_ctrl(struct b43_wldev *dev, bool enable)
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/TxPwrFix */
static void b43_nphy_tx_power_fix(struct b43_wldev *dev)
{
+ struct b43_phy *phy = &dev->phy;
struct b43_phy_n *nphy = dev->phy.n;
struct ssb_sprom *sprom = dev->dev->bus_sprom;
u8 txpi[2], bbmult, i;
u16 tmp, radio_gain, dac_gain;
- u16 freq = dev->phy.channel_freq;
+ u16 freq = phy->chandef->chan->center_freq;
u32 txgain;
/* u32 gaintbl; rev3+ */
@@ -3474,6 +3477,7 @@ static void b43_nphy_tx_prepare_adjusted_power_table(struct b43_wldev *dev)
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/TxPwrCtrlSetup */
static void b43_nphy_tx_power_ctl_setup(struct b43_wldev *dev)
{
+ struct b43_phy *phy = &dev->phy;
struct b43_phy_n *nphy = dev->phy.n;
struct ssb_sprom *sprom = dev->dev->bus_sprom;
@@ -3483,7 +3487,7 @@ static void b43_nphy_tx_power_ctl_setup(struct b43_wldev *dev)
s32 num, den, pwr;
u32 regval[64];
- u16 freq = dev->phy.channel_freq;
+ u16 freq = phy->chandef->chan->center_freq;
u16 tmp;
u16 r; /* routing */
u8 i, c;
@@ -4500,7 +4504,7 @@ static void b43_nphy_save_cal(struct b43_wldev *dev)
txcal_radio_regs[2] = b43_radio_read(dev, 0x8D);
txcal_radio_regs[3] = b43_radio_read(dev, 0xBC);
}
- iqcal_chanspec->center_freq = dev->phy.channel_freq;
+ iqcal_chanspec->center_freq = dev->phy.chandef->chan->center_freq;
iqcal_chanspec->channel_type = dev->phy.channel_type;
b43_ntab_read_bulk(dev, B43_NTAB16(15, 80), 8, table);
@@ -4581,6 +4585,7 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
struct nphy_txgains target,
bool full, bool mphase)
{
+ struct b43_phy *phy = &dev->phy;
struct b43_phy_n *nphy = dev->phy.n;
int i;
int error = 0;
@@ -4773,7 +4778,7 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev,
nphy->txiqlocal_bestc);
nphy->txiqlocal_coeffsvalid = true;
nphy->txiqlocal_chanspec.center_freq =
- dev->phy.channel_freq;
+ phy->chandef->chan->center_freq;
nphy->txiqlocal_chanspec.channel_type =
dev->phy.channel_type;
} else {
@@ -4811,7 +4816,7 @@ static void b43_nphy_reapply_tx_cal_coeffs(struct b43_wldev *dev)
bool equal = true;
if (!nphy->txiqlocal_coeffsvalid ||
- nphy->txiqlocal_chanspec.center_freq != dev->phy.channel_freq ||
+ nphy->txiqlocal_chanspec.center_freq != dev->phy.chandef->chan->center_freq ||
nphy->txiqlocal_chanspec.channel_type != dev->phy.channel_type)
return;
@@ -5502,7 +5507,6 @@ static int b43_nphy_set_channel(struct b43_wldev *dev,
/* Channel is set later in common code, but we need to set it on our
own to let this function's subcalls work properly. */
phy->channel = channel->hw_value;
- phy->channel_freq = channel->center_freq;
if (b43_channel_type_is_40mhz(phy->channel_type) !=
b43_channel_type_is_40mhz(channel_type))
--
1.8.4.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
