On 05/23/2014 03:43 AM, Marc Stürmer wrote:
Greetings,
I've recently bought myself an USB device, based on the RTL8192CU chipset,
running under 64bit kernel 3.15.0-rc6 at the moment.
Firmware is installed where it should be.
Debuglog of the kernel is here: http://pastebin.com/Eh6pBbra
The problem is this: I am running the device in managed mode and let it connect
to my AP.
First all works as intended, but after a short while the device always stops
working altogether.
No output in the kernel log, not even about deauthenticating but it just stops
working at all, no traffic anymore, I've got to unplug it or unload and reload
the driver and then the same starts all over again.
This seems to be a long lasting regression
(https://www.google.com/#q=linux+rtl8192cu+disconnects+linux+) and there's also
a repository on Github containing the original Realtek driver ported up to
kernel version 3.11 (https://github.com/pvaret/rtl8192cu-fixes), because the
kernel driver seemed to be not working flawlessly until then.
So my question is: what else could/should I do to get a stable, working wifi
connection with that device on my linux box that lasts more than just a few
minutes?
Looking at your kernel log, the first thing I see is
[ 295.926536] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[ 295.926578] usbcore: registered new interface driver rtl8192cu
[ 295.949364] usb 3-9: Direct firmware load failed with error -2
[ 295.949366] usb 3-9: Falling back to user helper
[ 295.955563] rtlwifi: Loading alternative firmware rtlwifi/rtl8192cufw.bin
You should try the newest firmware. If you have updated your code base recently,
then your distro apparently does not supply it. You should get the latest copy
of firmware with
git clone git://git.kernel.org/pub/scm/linux/kernel/git/dwmw2/linux-firmware.git
sudo cp linux-firmware/rtlwifi/rtl8192cufw_TMSC.bin /lib/firmware/rtlwifi/.
Yes, there are a number of users that are unhappy with this driver. Realtek
provided it, and then abandoned it. I have no knowledge of its internals and the
only documentation I have is what is in the driver code.
In the past, I have tried to solve problems that users have posted, but all of
those efforts eventually have stalled because those users have failed to answer
NEEDINFO queries, or the equivalent, in a timely fashion. I either have
forgotten what we were trying to do, or I have had to move onto a more pressing
problem. At the moment, I do have some time.
Load the driver with 'modprobe -v rtl8192cu debug=3' and post the from when the
driver is loaded until it fails.
Larry
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
