Search Linux Wireless

Re: [PATCH] ath10k: AP: handle HT station which does not have HT RX MCS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11 February 2014 09:06, Kalle Valo <kvalo@xxxxxxxxxxxxxxxx> wrote:
> Bartosz Markowski <bartosz.markowski@xxxxxxxxx> writes:
>
>> This is a workaround for HT-enabled STAs which break the spec
>> and have no HT capabilities RX mask (no HT RX MCS map).
>>
>> As per spec, in section 20.3.5 Modulation and coding scheme (MCS),
>> MCS 0 through 7 are mandatory in 20MHz with 800 ns GI at all STAs.
>>
>> Firmware asserts if such situation occurs.
>>
>> Signed-off-by: Bartosz Markowski <bartosz.markowski@xxxxxxxxx>
>
> This conflicted with Marek K's patch "ath10k: Set proper nss value for
> the peer". Please check that my resolution in ath-next-test is correct:
>
> https://github.com/kvalo/ath/commit/d56aa0e779c17f8048a70a9dbd5228b54d9a712e

Looks good.

-- 
Bartosz
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux