Search Linux Wireless

Re: [PATCH] ath10k: AP: handle HT station which does not have HT RX MCS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Bartosz Markowski <bartosz.markowski@xxxxxxxxx> writes:

> This is a workaround for HT-enabled STAs which break the spec
> and have no HT capabilities RX mask (no HT RX MCS map).
>
> As per spec, in section 20.3.5 Modulation and coding scheme (MCS),
> MCS 0 through 7 are mandatory in 20MHz with 800 ns GI at all STAs.
>
> Firmware asserts if such situation occurs.
>
> Signed-off-by: Bartosz Markowski <bartosz.markowski@xxxxxxxxx>

This conflicted with Marek K's patch "ath10k: Set proper nss value for
the peer". Please check that my resolution in ath-next-test is correct:

https://github.com/kvalo/ath/commit/d56aa0e779c17f8048a70a9dbd5228b54d9a712e

-- 
Kalle Valo
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux