I met a problem when I set to 5Mhz Mode A can't work... Do you have some ideas on this issue? Best Regards. -------------------------------------- Bopeng Liu WIND RIVER | China Development Center Phone: 8610-6483-5012 ________________________________________ From: linux-wireless-owner@xxxxxxxxxxxxxxx [linux-wireless-owner@xxxxxxxxxxxxxxx] on behalf of Johannes Berg [johannes@xxxxxxxxxxxxxxxx] Sent: Thursday, January 23, 2014 11:59 PM To: Steven Bateman Cc: Linux Wireless Subject: Re: Issue with authentication to Aerohive APs On Mon, 2014-01-20 at 16:27 +0000, Steven Bateman wrote: > You're right, I did accidentally filter out acks. I have an updated > filtered capture attached. > > It could be either, but I'm going off of wpa_supplicant instructing to > transmit the 2nd EAPOL frame, but it never showing up in the air. The > consultations I've received so far indicated that it would more likely be > a driver/firmware issue, but I don't have enough experience with Linux > supplicants to be sure about that. Ohh. Ok. Yeah then it's most likely a driver bug. Hmm. I vaguely remember bugs like this but I thought they were all fixed. Is there any chance you could try to put the particular AP into 2.4 GHz? Although I guess you have similar APs on 2.4 GHz channels that work? Could you (or the user actually running into the problem) collect tracing maybe? http://wireless.kernel.org/en/developers/Documentation/mac80211/tracing johannes -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
