Matthias May wrote: > I'm in the position where i want to use a 9390 as 2x2 instead of 3x3. > I use backports-3.12-1. > I've set the rx and tx mask in eeprom to 0x5. > Every 30 seconds there is a short disconnect. > Enabling some logging in > echo "0x0000050C" > /sys/kernel/debug/ieee80211/phy0/ath9k/debug > shows that something seems to go wrong during noise calibration. (See > attached log). > What seems odd to me, that for IQ cal it tries to calibrate chain 1 > instead of chain 2. What is the value of 0x40d8 register ? echo 0x40d8 > /sys/kernel/debug/ieee80211/phy0/ath9k/regidx cat /sys/kernel/debug/ieee80211/phy0/ath9k/regval Sujith -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
