> Il Giovedì 24 Ottobre 2013 13:41, Stanislaw Gruszka <sgruszka@xxxxxxxxxx> ha scritto: > > On Thu, Oct 24, 2013 at 12:32:16PM +0100, Gianfranco Costamagna wrote: >> >> >> Il Giovedì 24 Ottobre 2013 13:25, Stanislaw Gruszka > <sgruszka@xxxxxxxxxx> ha scritto: >> >> On Wed, Oct 23, 2013 at 03:27:49PM +0100, Gianfranco Costamagna wrote: >> > >> >> Hi Kernel Wireless developers, I write here since I have an issue > with this module. >> >> >> >> >> >> We bought 2 of them since they are both 2.4 and 5Ghz capable, and > they seem to be powerful enough for our pourposes >> >> > http://www.edimax.com/au/produce_detail.php?pd_id=399&pl1_id=1&pl2_id=44 >> >> >> >> >> >> Anyway there is a problem, that the linux kernel seems to be not > supporting them >> >> >> >> I tried following this guide >> >> http://wikidevi.com/wiki/Edimax_EW-7733UnD >> >> rt3573sta, possibly rt5572sta, and future support in rt2800usb > "uhosg's patchset adding support, may be in by k3.12" >> >> but at this moment it is showing an interface with one of them (I > cannot connect to anything, the interface shown seems to be incorrect), with > another I get a kernel anic and with the third one doesn't work at all. >> >> >> >> lsusb |grep Edimax >> >> >> >> Bus 002 Device 002: ID 7392:7733 Edimax Technology Co., Ltd >> > >> >I have that exect device and it works ok here, but I'm using >> >wireless-testing tree. So perhaps you should try install that >> >tree or use backports . >> >> >> Wonderful! I don't really understand what do you mean with backports, > are you referring to "linux kernel backports" right? > > Yes. > >> So I can choose the backport source or to checkout and build the > wireless-testing tree. >> >> Just as information, how long will it take to have it into the stable > mainline? > > Current wireless-testing content will be available on 3.13 , > though I think that device should also work on 3.12 . > Ok I built a custom kernel but I still have some issues Ubuntu 13.10 x64 git clone http://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git cd wireless-testing copied my config from this kernel http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.12-rc7-saucy/ make oldconfig (a tail of my .config file after the make) CONFIG_RT2800PCI=m CONFIG_RT2800PCI_RT33XX=y CONFIG_RT2800PCI_RT35XX=y CONFIG_RT2800PCI_RT53XX=y CONFIG_RT2800PCI_RT3290=y CONFIG_RT2500USB=m CONFIG_RT73USB=m CONFIG_RT2800USB=m CONFIG_RT2800USB_RT33XX=y CONFIG_RT2800USB_RT35XX=y # CONFIG_RT2800USB_RT3573 is not set CONFIG_RT2800USB_RT53XX=y CONFIG_RT2800USB_RT55XX=y CONFIG_RT2800USB_UNKNOWN=y CONFIG_RT2800_LIB=m CONFIG_RT2800_LIB_MMIO=m CONFIG_RT2X00_LIB_MMIO=m CONFIG_RT2X00_LIB_PCI=m CONFIG_RT2X00_LIB_USB=m CONFIG_RT2X00_LIB=m CONFIG_RT2X00_LIB_FIRMWARE=y CONFIG_RT2X00_LIB_CRYPTO=y CONFIG_RT2X00_LIB_LEDS=y # CONFIG_RT2X00_LIB_DEBUGFS is not set # CONFIG_RT2X00_DEBUG is not set (apt-get build-dep linux) make make all sudo make modules_install sudo make install I was surprised that everything was automatically copied in /boot and grub automatically found the new kernel without manual mkinitrd anymore (so long time from my last kernel build) Reboot locutus@gianfranco-Latitude-E5520:~/wireless-testing$ uname -a Linux gianfranco-Latitude-E5520 3.12.0-rc5-wl #2 SMP Thu Oct 31 14:04:43 CET 2013 x86_64 x86_64 x86_64 GNU/Linux put key in my pc [ 471.585065] usb 2-1.2: new high-speed USB device number 11 using ehci-pci [ 471.693762] usb 2-1.2: New USB device found, idVendor=7392, idProduct=7733 [ 471.693766] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 471.693768] usb 2-1.2: Product: 802.11 n WLAN [ 471.693770] usb 2-1.2: Manufacturer: Ralink [ 471.693771] usb 2-1.2: SerialNumber: 1.0 sudo modprobe rt2800usb [ 540.170899] usbcore: registered new interface driver rt2800usb nothing works... Can you please help me again? Many thanks have a nice day, Gianfranco > > Stanislaw > -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html