From: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
The HW routines to set various WoW registers are present
in wow.c. For some reason, it has been compiled as part
of the main ath9k.ko module all this time, when it should
really be part of ath9k_hw.ko. This patch renames the file to
ar9003_wow.ko and adds it to ath9k_hw.ko.
Signed-off-by: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/Makefile | 3 +-
drivers/net/wireless/ath/ath9k/ar9003_wow.c | 422 ++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath9k/wow.c | 422 ----------------------------
3 files changed, 424 insertions(+), 423 deletions(-)
create mode 100644 drivers/net/wireless/ath/ath9k/ar9003_wow.c
delete mode 100644 drivers/net/wireless/ath/ath9k/wow.c
diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index f86a261..796686a 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -14,7 +14,6 @@ ath9k-$(CONFIG_ATH9K_AHB) += ahb.o
ath9k-$(CONFIG_ATH9K_DEBUGFS) += debug.o
ath9k-$(CONFIG_ATH9K_DFS_DEBUGFS) += dfs_debug.o
ath9k-$(CONFIG_ATH9K_DFS_CERTIFIED) += dfs.o
-ath9k-$(CONFIG_PM_SLEEP) += wow.o
ath9k-$(CONFIG_ATH9K_TX99) += tx99.o
obj-$(CONFIG_ATH9K) += ath9k.o
@@ -41,6 +40,8 @@ ath9k_hw-y:= \
ar9003_eeprom.o \
ar9003_paprd.o
+ath9k_hw-$(CONFIG_PM_SLEEP) += ar9003_wow.o
+
ath9k_hw-$(CONFIG_ATH9K_BTCOEX_SUPPORT) += btcoex.o \
ar9003_mci.o
obj-$(CONFIG_ATH9K_HW) += ath9k_hw.o
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_wow.c b/drivers/net/wireless/ath/ath9k/ar9003_wow.c
new file mode 100644
index 0000000..81c88dd
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/ar9003_wow.c
@@ -0,0 +1,422 @@
+/*
+ * Copyright (c) 2012 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/export.h>
+#include "ath9k.h"
+#include "reg.h"
+#include "hw-ops.h"
+
+const char *ath9k_hw_wow_event_to_string(u32 wow_event)
+{
+ if (wow_event & AH_WOW_MAGIC_PATTERN_EN)
+ return "Magic pattern";
+ if (wow_event & AH_WOW_USER_PATTERN_EN)
+ return "User pattern";
+ if (wow_event & AH_WOW_LINK_CHANGE)
+ return "Link change";
+ if (wow_event & AH_WOW_BEACON_MISS)
+ return "Beacon miss";
+
+ return "unknown reason";
+}
+EXPORT_SYMBOL(ath9k_hw_wow_event_to_string);
+
+static void ath9k_hw_set_powermode_wow_sleep(struct ath_hw *ah)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+
+ REG_SET_BIT(ah, AR_STA_ID1, AR_STA_ID1_PWR_SAV);
+
+ /* set rx disable bit */
+ REG_WRITE(ah, AR_CR, AR_CR_RXD);
+
+ if (!ath9k_hw_wait(ah, AR_CR, AR_CR_RXE, 0, AH_WAIT_TIMEOUT)) {
+ ath_err(common, "Failed to stop Rx DMA in 10ms AR_CR=0x%08x AR_DIAG_SW=0x%08x\n",
+ REG_READ(ah, AR_CR), REG_READ(ah, AR_DIAG_SW));
+ return;
+ }
+
+ REG_WRITE(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_ON_INT);
+}
+
+static void ath9k_wow_create_keep_alive_pattern(struct ath_hw *ah)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ u8 sta_mac_addr[ETH_ALEN], ap_mac_addr[ETH_ALEN];
+ u32 ctl[13] = {0};
+ u32 data_word[KAL_NUM_DATA_WORDS];
+ u8 i;
+ u32 wow_ka_data_word0;
+
+ memcpy(sta_mac_addr, common->macaddr, ETH_ALEN);
+ memcpy(ap_mac_addr, common->curbssid, ETH_ALEN);
+
+ /* set the transmit buffer */
+ ctl[0] = (KAL_FRAME_LEN | (MAX_RATE_POWER << 16));
+ ctl[1] = 0;
+ ctl[3] = 0xb; /* OFDM_6M hardware value for this rate */
+ ctl[4] = 0;
+ ctl[7] = (ah->txchainmask) << 2;
+ ctl[2] = 0xf << 16; /* tx_tries 0 */
+
+ for (i = 0; i < KAL_NUM_DESC_WORDS; i++)
+ REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + i * 4), ctl[i]);
+
+ REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + i * 4), ctl[i]);
+
+ data_word[0] = (KAL_FRAME_TYPE << 2) | (KAL_FRAME_SUB_TYPE << 4) |
+ (KAL_TO_DS << 8) | (KAL_DURATION_ID << 16);
+ data_word[1] = (ap_mac_addr[3] << 24) | (ap_mac_addr[2] << 16) |
+ (ap_mac_addr[1] << 8) | (ap_mac_addr[0]);
+ data_word[2] = (sta_mac_addr[1] << 24) | (sta_mac_addr[0] << 16) |
+ (ap_mac_addr[5] << 8) | (ap_mac_addr[4]);
+ data_word[3] = (sta_mac_addr[5] << 24) | (sta_mac_addr[4] << 16) |
+ (sta_mac_addr[3] << 8) | (sta_mac_addr[2]);
+ data_word[4] = (ap_mac_addr[3] << 24) | (ap_mac_addr[2] << 16) |
+ (ap_mac_addr[1] << 8) | (ap_mac_addr[0]);
+ data_word[5] = (ap_mac_addr[5] << 8) | (ap_mac_addr[4]);
+
+ if (AR_SREV_9462_20(ah)) {
+ /* AR9462 2.0 has an extra descriptor word (time based
+ * discard) compared to other chips */
+ REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + (12 * 4)), 0);
+ wow_ka_data_word0 = AR_WOW_TXBUF(13);
+ } else {
+ wow_ka_data_word0 = AR_WOW_TXBUF(12);
+ }
+
+ for (i = 0; i < KAL_NUM_DATA_WORDS; i++)
+ REG_WRITE(ah, (wow_ka_data_word0 + i*4), data_word[i]);
+
+}
+
+void ath9k_hw_wow_apply_pattern(struct ath_hw *ah, u8 *user_pattern,
+ u8 *user_mask, int pattern_count,
+ int pattern_len)
+{
+ int i;
+ u32 pattern_val, mask_val;
+ u32 set, clr;
+
+ /* FIXME: should check count by querying the hardware capability */
+ if (pattern_count >= MAX_NUM_PATTERN)
+ return;
+
+ REG_SET_BIT(ah, AR_WOW_PATTERN, BIT(pattern_count));
+
+ /* set the registers for pattern */
+ for (i = 0; i < MAX_PATTERN_SIZE; i += 4) {
+ memcpy(&pattern_val, user_pattern, 4);
+ REG_WRITE(ah, (AR_WOW_TB_PATTERN(pattern_count) + i),
+ pattern_val);
+ user_pattern += 4;
+ }
+
+ /* set the registers for mask */
+ for (i = 0; i < MAX_PATTERN_MASK_SIZE; i += 4) {
+ memcpy(&mask_val, user_mask, 4);
+ REG_WRITE(ah, (AR_WOW_TB_MASK(pattern_count) + i), mask_val);
+ user_mask += 4;
+ }
+
+ /* set the pattern length to be matched
+ *
+ * AR_WOW_LENGTH1_REG1
+ * bit 31:24 pattern 0 length
+ * bit 23:16 pattern 1 length
+ * bit 15:8 pattern 2 length
+ * bit 7:0 pattern 3 length
+ *
+ * AR_WOW_LENGTH1_REG2
+ * bit 31:24 pattern 4 length
+ * bit 23:16 pattern 5 length
+ * bit 15:8 pattern 6 length
+ * bit 7:0 pattern 7 length
+ *
+ * the below logic writes out the new
+ * pattern length for the corresponding
+ * pattern_count, while masking out the
+ * other fields
+ */
+
+ ah->wow_event_mask |= BIT(pattern_count + AR_WOW_PAT_FOUND_SHIFT);
+
+ if (pattern_count < 4) {
+ /* Pattern 0-3 uses AR_WOW_LENGTH1 register */
+ set = (pattern_len & AR_WOW_LENGTH_MAX) <<
+ AR_WOW_LEN1_SHIFT(pattern_count);
+ clr = AR_WOW_LENGTH1_MASK(pattern_count);
+ REG_RMW(ah, AR_WOW_LENGTH1, set, clr);
+ } else {
+ /* Pattern 4-7 uses AR_WOW_LENGTH2 register */
+ set = (pattern_len & AR_WOW_LENGTH_MAX) <<
+ AR_WOW_LEN2_SHIFT(pattern_count);
+ clr = AR_WOW_LENGTH2_MASK(pattern_count);
+ REG_RMW(ah, AR_WOW_LENGTH2, set, clr);
+ }
+
+}
+EXPORT_SYMBOL(ath9k_hw_wow_apply_pattern);
+
+u32 ath9k_hw_wow_wakeup(struct ath_hw *ah)
+{
+ u32 wow_status = 0;
+ u32 val = 0, rval;
+
+ /*
+ * read the WoW status register to know
+ * the wakeup reason
+ */
+ rval = REG_READ(ah, AR_WOW_PATTERN);
+ val = AR_WOW_STATUS(rval);
+
+ /*
+ * mask only the WoW events that we have enabled. Sometimes
+ * we have spurious WoW events from the AR_WOW_PATTERN
+ * register. This mask will clean it up.
+ */
+
+ val &= ah->wow_event_mask;
+
+ if (val) {
+ if (val & AR_WOW_MAGIC_PAT_FOUND)
+ wow_status |= AH_WOW_MAGIC_PATTERN_EN;
+ if (AR_WOW_PATTERN_FOUND(val))
+ wow_status |= AH_WOW_USER_PATTERN_EN;
+ if (val & AR_WOW_KEEP_ALIVE_FAIL)
+ wow_status |= AH_WOW_LINK_CHANGE;
+ if (val & AR_WOW_BEACON_FAIL)
+ wow_status |= AH_WOW_BEACON_MISS;
+ }
+
+ /*
+ * set and clear WOW_PME_CLEAR registers for the chip to
+ * generate next wow signal.
+ * disable D3 before accessing other registers ?
+ */
+
+ /* do we need to check the bit value 0x01000000 (7-10) ?? */
+ REG_RMW(ah, AR_PCIE_PM_CTRL, AR_PMCTRL_WOW_PME_CLR,
+ AR_PMCTRL_PWR_STATE_D1D3);
+
+ /*
+ * clear all events
+ */
+ REG_WRITE(ah, AR_WOW_PATTERN,
+ AR_WOW_CLEAR_EVENTS(REG_READ(ah, AR_WOW_PATTERN)));
+
+ /*
+ * restore the beacon threshold to init value
+ */
+ REG_WRITE(ah, AR_RSSI_THR, INIT_RSSI_THR);
+
+ /*
+ * Restore the way the PCI-E reset, Power-On-Reset, external
+ * PCIE_POR_SHORT pins are tied to its original value.
+ * Previously just before WoW sleep, we untie the PCI-E
+ * reset to our Chip's Power On Reset so that any PCI-E
+ * reset from the bus will not reset our chip
+ */
+ if (ah->is_pciexpress)
+ ath9k_hw_configpcipowersave(ah, false);
+
+ ah->wow_event_mask = 0;
+
+ return wow_status;
+}
+EXPORT_SYMBOL(ath9k_hw_wow_wakeup);
+
+void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable)
+{
+ u32 wow_event_mask;
+ u32 set, clr;
+
+ /*
+ * wow_event_mask is a mask to the AR_WOW_PATTERN register to
+ * indicate which WoW events we have enabled. The WoW events
+ * are from the 'pattern_enable' in this function and
+ * 'pattern_count' of ath9k_hw_wow_apply_pattern()
+ */
+ wow_event_mask = ah->wow_event_mask;
+
+ /*
+ * Untie Power-on-Reset from the PCI-E-Reset. When we are in
+ * WOW sleep, we do want the Reset from the PCI-E to disturb
+ * our hw state
+ */
+ if (ah->is_pciexpress) {
+ /*
+ * we need to untie the internal POR (power-on-reset)
+ * to the external PCI-E reset. We also need to tie
+ * the PCI-E Phy reset to the PCI-E reset.
+ */
+ set = AR_WA_RESET_EN | AR_WA_POR_SHORT;
+ clr = AR_WA_UNTIE_RESET_EN | AR_WA_D3_L1_DISABLE;
+ REG_RMW(ah, AR_WA, set, clr);
+ }
+
+ /*
+ * set the power states appropriately and enable PME
+ */
+ set = AR_PMCTRL_HOST_PME_EN | AR_PMCTRL_PWR_PM_CTRL_ENA |
+ AR_PMCTRL_AUX_PWR_DET | AR_PMCTRL_WOW_PME_CLR;
+
+ /*
+ * set and clear WOW_PME_CLEAR registers for the chip
+ * to generate next wow signal.
+ */
+ REG_SET_BIT(ah, AR_PCIE_PM_CTRL, set);
+ clr = AR_PMCTRL_WOW_PME_CLR;
+ REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, clr);
+
+ /*
+ * Setup for:
+ * - beacon misses
+ * - magic pattern
+ * - keep alive timeout
+ * - pattern matching
+ */
+
+ /*
+ * Program default values for pattern backoff, aifs/slot/KAL count,
+ * beacon miss timeout, KAL timeout, etc.
+ */
+ set = AR_WOW_BACK_OFF_SHIFT(AR_WOW_PAT_BACKOFF);
+ REG_SET_BIT(ah, AR_WOW_PATTERN, set);
+
+ set = AR_WOW_AIFS_CNT(AR_WOW_CNT_AIFS_CNT) |
+ AR_WOW_SLOT_CNT(AR_WOW_CNT_SLOT_CNT) |
+ AR_WOW_KEEP_ALIVE_CNT(AR_WOW_CNT_KA_CNT);
+ REG_SET_BIT(ah, AR_WOW_COUNT, set);
+
+ if (pattern_enable & AH_WOW_BEACON_MISS)
+ set = AR_WOW_BEACON_TIMO;
+ /* We are not using beacon miss, program a large value */
+ else
+ set = AR_WOW_BEACON_TIMO_MAX;
+
+ REG_WRITE(ah, AR_WOW_BCN_TIMO, set);
+
+ /*
+ * Keep alive timo in ms except AR9280
+ */
+ if (!pattern_enable)
+ set = AR_WOW_KEEP_ALIVE_NEVER;
+ else
+ set = KAL_TIMEOUT * 32;
+
+ REG_WRITE(ah, AR_WOW_KEEP_ALIVE_TIMO, set);
+
+ /*
+ * Keep alive delay in us. based on 'power on clock',
+ * therefore in usec
+ */
+ set = KAL_DELAY * 1000;
+ REG_WRITE(ah, AR_WOW_KEEP_ALIVE_DELAY, set);
+
+ /*
+ * Create keep alive pattern to respond to beacons
+ */
+ ath9k_wow_create_keep_alive_pattern(ah);
+
+ /*
+ * Configure MAC WoW Registers
+ */
+ set = 0;
+ /* Send keep alive timeouts anyway */
+ clr = AR_WOW_KEEP_ALIVE_AUTO_DIS;
+
+ if (pattern_enable & AH_WOW_LINK_CHANGE)
+ wow_event_mask |= AR_WOW_KEEP_ALIVE_FAIL;
+ else
+ set = AR_WOW_KEEP_ALIVE_FAIL_DIS;
+
+ set = AR_WOW_KEEP_ALIVE_FAIL_DIS;
+ REG_RMW(ah, AR_WOW_KEEP_ALIVE, set, clr);
+
+ /*
+ * we are relying on a bmiss failure. ensure we have
+ * enough threshold to prevent false positives
+ */
+ REG_RMW_FIELD(ah, AR_RSSI_THR, AR_RSSI_THR_BM_THR,
+ AR_WOW_BMISSTHRESHOLD);
+
+ set = 0;
+ clr = 0;
+
+ if (pattern_enable & AH_WOW_BEACON_MISS) {
+ set = AR_WOW_BEACON_FAIL_EN;
+ wow_event_mask |= AR_WOW_BEACON_FAIL;
+ } else {
+ clr = AR_WOW_BEACON_FAIL_EN;
+ }
+
+ REG_RMW(ah, AR_WOW_BCN_EN, set, clr);
+
+ set = 0;
+ clr = 0;
+ /*
+ * Enable the magic packet registers
+ */
+ if (pattern_enable & AH_WOW_MAGIC_PATTERN_EN) {
+ set = AR_WOW_MAGIC_EN;
+ wow_event_mask |= AR_WOW_MAGIC_PAT_FOUND;
+ } else {
+ clr = AR_WOW_MAGIC_EN;
+ }
+ set |= AR_WOW_MAC_INTR_EN;
+ REG_RMW(ah, AR_WOW_PATTERN, set, clr);
+
+ REG_WRITE(ah, AR_WOW_PATTERN_MATCH_LT_256B,
+ AR_WOW_PATTERN_SUPPORTED);
+
+ /*
+ * Set the power states appropriately and enable PME
+ */
+ clr = 0;
+ set = AR_PMCTRL_PWR_STATE_D1D3 | AR_PMCTRL_HOST_PME_EN |
+ AR_PMCTRL_PWR_PM_CTRL_ENA;
+
+ clr = AR_PCIE_PM_CTRL_ENA;
+ REG_RMW(ah, AR_PCIE_PM_CTRL, set, clr);
+
+ /*
+ * this is needed to prevent the chip waking up
+ * the host within 3-4 seconds with certain
+ * platform/BIOS. The fix is to enable
+ * D1 & D3 to match original definition and
+ * also match the OTP value. Anyway this
+ * is more related to SW WOW.
+ */
+ clr = AR_PMCTRL_PWR_STATE_D1D3;
+ REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, clr);
+
+ set = AR_PMCTRL_PWR_STATE_D1D3_REAL;
+ REG_SET_BIT(ah, AR_PCIE_PM_CTRL, set);
+
+ REG_CLR_BIT(ah, AR_STA_ID1, AR_STA_ID1_PRESERVE_SEQNUM);
+
+ /* to bring down WOW power low margin */
+ set = BIT(13);
+ REG_SET_BIT(ah, AR_PCIE_PHY_REG3, set);
+ /* HW WoW */
+ clr = BIT(5);
+ REG_CLR_BIT(ah, AR_PCU_MISC_MODE3, clr);
+
+ ath9k_hw_set_powermode_wow_sleep(ah);
+ ah->wow_event_mask = wow_event_mask;
+}
+EXPORT_SYMBOL(ath9k_hw_wow_enable);
diff --git a/drivers/net/wireless/ath/ath9k/wow.c b/drivers/net/wireless/ath/ath9k/wow.c
deleted file mode 100644
index 81c88dd..0000000
--- a/drivers/net/wireless/ath/ath9k/wow.c
+++ /dev/null
@@ -1,422 +0,0 @@
-/*
- * Copyright (c) 2012 Qualcomm Atheros, Inc.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include <linux/export.h>
-#include "ath9k.h"
-#include "reg.h"
-#include "hw-ops.h"
-
-const char *ath9k_hw_wow_event_to_string(u32 wow_event)
-{
- if (wow_event & AH_WOW_MAGIC_PATTERN_EN)
- return "Magic pattern";
- if (wow_event & AH_WOW_USER_PATTERN_EN)
- return "User pattern";
- if (wow_event & AH_WOW_LINK_CHANGE)
- return "Link change";
- if (wow_event & AH_WOW_BEACON_MISS)
- return "Beacon miss";
-
- return "unknown reason";
-}
-EXPORT_SYMBOL(ath9k_hw_wow_event_to_string);
-
-static void ath9k_hw_set_powermode_wow_sleep(struct ath_hw *ah)
-{
- struct ath_common *common = ath9k_hw_common(ah);
-
- REG_SET_BIT(ah, AR_STA_ID1, AR_STA_ID1_PWR_SAV);
-
- /* set rx disable bit */
- REG_WRITE(ah, AR_CR, AR_CR_RXD);
-
- if (!ath9k_hw_wait(ah, AR_CR, AR_CR_RXE, 0, AH_WAIT_TIMEOUT)) {
- ath_err(common, "Failed to stop Rx DMA in 10ms AR_CR=0x%08x AR_DIAG_SW=0x%08x\n",
- REG_READ(ah, AR_CR), REG_READ(ah, AR_DIAG_SW));
- return;
- }
-
- REG_WRITE(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_ON_INT);
-}
-
-static void ath9k_wow_create_keep_alive_pattern(struct ath_hw *ah)
-{
- struct ath_common *common = ath9k_hw_common(ah);
- u8 sta_mac_addr[ETH_ALEN], ap_mac_addr[ETH_ALEN];
- u32 ctl[13] = {0};
- u32 data_word[KAL_NUM_DATA_WORDS];
- u8 i;
- u32 wow_ka_data_word0;
-
- memcpy(sta_mac_addr, common->macaddr, ETH_ALEN);
- memcpy(ap_mac_addr, common->curbssid, ETH_ALEN);
-
- /* set the transmit buffer */
- ctl[0] = (KAL_FRAME_LEN | (MAX_RATE_POWER << 16));
- ctl[1] = 0;
- ctl[3] = 0xb; /* OFDM_6M hardware value for this rate */
- ctl[4] = 0;
- ctl[7] = (ah->txchainmask) << 2;
- ctl[2] = 0xf << 16; /* tx_tries 0 */
-
- for (i = 0; i < KAL_NUM_DESC_WORDS; i++)
- REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + i * 4), ctl[i]);
-
- REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + i * 4), ctl[i]);
-
- data_word[0] = (KAL_FRAME_TYPE << 2) | (KAL_FRAME_SUB_TYPE << 4) |
- (KAL_TO_DS << 8) | (KAL_DURATION_ID << 16);
- data_word[1] = (ap_mac_addr[3] << 24) | (ap_mac_addr[2] << 16) |
- (ap_mac_addr[1] << 8) | (ap_mac_addr[0]);
- data_word[2] = (sta_mac_addr[1] << 24) | (sta_mac_addr[0] << 16) |
- (ap_mac_addr[5] << 8) | (ap_mac_addr[4]);
- data_word[3] = (sta_mac_addr[5] << 24) | (sta_mac_addr[4] << 16) |
- (sta_mac_addr[3] << 8) | (sta_mac_addr[2]);
- data_word[4] = (ap_mac_addr[3] << 24) | (ap_mac_addr[2] << 16) |
- (ap_mac_addr[1] << 8) | (ap_mac_addr[0]);
- data_word[5] = (ap_mac_addr[5] << 8) | (ap_mac_addr[4]);
-
- if (AR_SREV_9462_20(ah)) {
- /* AR9462 2.0 has an extra descriptor word (time based
- * discard) compared to other chips */
- REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + (12 * 4)), 0);
- wow_ka_data_word0 = AR_WOW_TXBUF(13);
- } else {
- wow_ka_data_word0 = AR_WOW_TXBUF(12);
- }
-
- for (i = 0; i < KAL_NUM_DATA_WORDS; i++)
- REG_WRITE(ah, (wow_ka_data_word0 + i*4), data_word[i]);
-
-}
-
-void ath9k_hw_wow_apply_pattern(struct ath_hw *ah, u8 *user_pattern,
- u8 *user_mask, int pattern_count,
- int pattern_len)
-{
- int i;
- u32 pattern_val, mask_val;
- u32 set, clr;
-
- /* FIXME: should check count by querying the hardware capability */
- if (pattern_count >= MAX_NUM_PATTERN)
- return;
-
- REG_SET_BIT(ah, AR_WOW_PATTERN, BIT(pattern_count));
-
- /* set the registers for pattern */
- for (i = 0; i < MAX_PATTERN_SIZE; i += 4) {
- memcpy(&pattern_val, user_pattern, 4);
- REG_WRITE(ah, (AR_WOW_TB_PATTERN(pattern_count) + i),
- pattern_val);
- user_pattern += 4;
- }
-
- /* set the registers for mask */
- for (i = 0; i < MAX_PATTERN_MASK_SIZE; i += 4) {
- memcpy(&mask_val, user_mask, 4);
- REG_WRITE(ah, (AR_WOW_TB_MASK(pattern_count) + i), mask_val);
- user_mask += 4;
- }
-
- /* set the pattern length to be matched
- *
- * AR_WOW_LENGTH1_REG1
- * bit 31:24 pattern 0 length
- * bit 23:16 pattern 1 length
- * bit 15:8 pattern 2 length
- * bit 7:0 pattern 3 length
- *
- * AR_WOW_LENGTH1_REG2
- * bit 31:24 pattern 4 length
- * bit 23:16 pattern 5 length
- * bit 15:8 pattern 6 length
- * bit 7:0 pattern 7 length
- *
- * the below logic writes out the new
- * pattern length for the corresponding
- * pattern_count, while masking out the
- * other fields
- */
-
- ah->wow_event_mask |= BIT(pattern_count + AR_WOW_PAT_FOUND_SHIFT);
-
- if (pattern_count < 4) {
- /* Pattern 0-3 uses AR_WOW_LENGTH1 register */
- set = (pattern_len & AR_WOW_LENGTH_MAX) <<
- AR_WOW_LEN1_SHIFT(pattern_count);
- clr = AR_WOW_LENGTH1_MASK(pattern_count);
- REG_RMW(ah, AR_WOW_LENGTH1, set, clr);
- } else {
- /* Pattern 4-7 uses AR_WOW_LENGTH2 register */
- set = (pattern_len & AR_WOW_LENGTH_MAX) <<
- AR_WOW_LEN2_SHIFT(pattern_count);
- clr = AR_WOW_LENGTH2_MASK(pattern_count);
- REG_RMW(ah, AR_WOW_LENGTH2, set, clr);
- }
-
-}
-EXPORT_SYMBOL(ath9k_hw_wow_apply_pattern);
-
-u32 ath9k_hw_wow_wakeup(struct ath_hw *ah)
-{
- u32 wow_status = 0;
- u32 val = 0, rval;
-
- /*
- * read the WoW status register to know
- * the wakeup reason
- */
- rval = REG_READ(ah, AR_WOW_PATTERN);
- val = AR_WOW_STATUS(rval);
-
- /*
- * mask only the WoW events that we have enabled. Sometimes
- * we have spurious WoW events from the AR_WOW_PATTERN
- * register. This mask will clean it up.
- */
-
- val &= ah->wow_event_mask;
-
- if (val) {
- if (val & AR_WOW_MAGIC_PAT_FOUND)
- wow_status |= AH_WOW_MAGIC_PATTERN_EN;
- if (AR_WOW_PATTERN_FOUND(val))
- wow_status |= AH_WOW_USER_PATTERN_EN;
- if (val & AR_WOW_KEEP_ALIVE_FAIL)
- wow_status |= AH_WOW_LINK_CHANGE;
- if (val & AR_WOW_BEACON_FAIL)
- wow_status |= AH_WOW_BEACON_MISS;
- }
-
- /*
- * set and clear WOW_PME_CLEAR registers for the chip to
- * generate next wow signal.
- * disable D3 before accessing other registers ?
- */
-
- /* do we need to check the bit value 0x01000000 (7-10) ?? */
- REG_RMW(ah, AR_PCIE_PM_CTRL, AR_PMCTRL_WOW_PME_CLR,
- AR_PMCTRL_PWR_STATE_D1D3);
-
- /*
- * clear all events
- */
- REG_WRITE(ah, AR_WOW_PATTERN,
- AR_WOW_CLEAR_EVENTS(REG_READ(ah, AR_WOW_PATTERN)));
-
- /*
- * restore the beacon threshold to init value
- */
- REG_WRITE(ah, AR_RSSI_THR, INIT_RSSI_THR);
-
- /*
- * Restore the way the PCI-E reset, Power-On-Reset, external
- * PCIE_POR_SHORT pins are tied to its original value.
- * Previously just before WoW sleep, we untie the PCI-E
- * reset to our Chip's Power On Reset so that any PCI-E
- * reset from the bus will not reset our chip
- */
- if (ah->is_pciexpress)
- ath9k_hw_configpcipowersave(ah, false);
-
- ah->wow_event_mask = 0;
-
- return wow_status;
-}
-EXPORT_SYMBOL(ath9k_hw_wow_wakeup);
-
-void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable)
-{
- u32 wow_event_mask;
- u32 set, clr;
-
- /*
- * wow_event_mask is a mask to the AR_WOW_PATTERN register to
- * indicate which WoW events we have enabled. The WoW events
- * are from the 'pattern_enable' in this function and
- * 'pattern_count' of ath9k_hw_wow_apply_pattern()
- */
- wow_event_mask = ah->wow_event_mask;
-
- /*
- * Untie Power-on-Reset from the PCI-E-Reset. When we are in
- * WOW sleep, we do want the Reset from the PCI-E to disturb
- * our hw state
- */
- if (ah->is_pciexpress) {
- /*
- * we need to untie the internal POR (power-on-reset)
- * to the external PCI-E reset. We also need to tie
- * the PCI-E Phy reset to the PCI-E reset.
- */
- set = AR_WA_RESET_EN | AR_WA_POR_SHORT;
- clr = AR_WA_UNTIE_RESET_EN | AR_WA_D3_L1_DISABLE;
- REG_RMW(ah, AR_WA, set, clr);
- }
-
- /*
- * set the power states appropriately and enable PME
- */
- set = AR_PMCTRL_HOST_PME_EN | AR_PMCTRL_PWR_PM_CTRL_ENA |
- AR_PMCTRL_AUX_PWR_DET | AR_PMCTRL_WOW_PME_CLR;
-
- /*
- * set and clear WOW_PME_CLEAR registers for the chip
- * to generate next wow signal.
- */
- REG_SET_BIT(ah, AR_PCIE_PM_CTRL, set);
- clr = AR_PMCTRL_WOW_PME_CLR;
- REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, clr);
-
- /*
- * Setup for:
- * - beacon misses
- * - magic pattern
- * - keep alive timeout
- * - pattern matching
- */
-
- /*
- * Program default values for pattern backoff, aifs/slot/KAL count,
- * beacon miss timeout, KAL timeout, etc.
- */
- set = AR_WOW_BACK_OFF_SHIFT(AR_WOW_PAT_BACKOFF);
- REG_SET_BIT(ah, AR_WOW_PATTERN, set);
-
- set = AR_WOW_AIFS_CNT(AR_WOW_CNT_AIFS_CNT) |
- AR_WOW_SLOT_CNT(AR_WOW_CNT_SLOT_CNT) |
- AR_WOW_KEEP_ALIVE_CNT(AR_WOW_CNT_KA_CNT);
- REG_SET_BIT(ah, AR_WOW_COUNT, set);
-
- if (pattern_enable & AH_WOW_BEACON_MISS)
- set = AR_WOW_BEACON_TIMO;
- /* We are not using beacon miss, program a large value */
- else
- set = AR_WOW_BEACON_TIMO_MAX;
-
- REG_WRITE(ah, AR_WOW_BCN_TIMO, set);
-
- /*
- * Keep alive timo in ms except AR9280
- */
- if (!pattern_enable)
- set = AR_WOW_KEEP_ALIVE_NEVER;
- else
- set = KAL_TIMEOUT * 32;
-
- REG_WRITE(ah, AR_WOW_KEEP_ALIVE_TIMO, set);
-
- /*
- * Keep alive delay in us. based on 'power on clock',
- * therefore in usec
- */
- set = KAL_DELAY * 1000;
- REG_WRITE(ah, AR_WOW_KEEP_ALIVE_DELAY, set);
-
- /*
- * Create keep alive pattern to respond to beacons
- */
- ath9k_wow_create_keep_alive_pattern(ah);
-
- /*
- * Configure MAC WoW Registers
- */
- set = 0;
- /* Send keep alive timeouts anyway */
- clr = AR_WOW_KEEP_ALIVE_AUTO_DIS;
-
- if (pattern_enable & AH_WOW_LINK_CHANGE)
- wow_event_mask |= AR_WOW_KEEP_ALIVE_FAIL;
- else
- set = AR_WOW_KEEP_ALIVE_FAIL_DIS;
-
- set = AR_WOW_KEEP_ALIVE_FAIL_DIS;
- REG_RMW(ah, AR_WOW_KEEP_ALIVE, set, clr);
-
- /*
- * we are relying on a bmiss failure. ensure we have
- * enough threshold to prevent false positives
- */
- REG_RMW_FIELD(ah, AR_RSSI_THR, AR_RSSI_THR_BM_THR,
- AR_WOW_BMISSTHRESHOLD);
-
- set = 0;
- clr = 0;
-
- if (pattern_enable & AH_WOW_BEACON_MISS) {
- set = AR_WOW_BEACON_FAIL_EN;
- wow_event_mask |= AR_WOW_BEACON_FAIL;
- } else {
- clr = AR_WOW_BEACON_FAIL_EN;
- }
-
- REG_RMW(ah, AR_WOW_BCN_EN, set, clr);
-
- set = 0;
- clr = 0;
- /*
- * Enable the magic packet registers
- */
- if (pattern_enable & AH_WOW_MAGIC_PATTERN_EN) {
- set = AR_WOW_MAGIC_EN;
- wow_event_mask |= AR_WOW_MAGIC_PAT_FOUND;
- } else {
- clr = AR_WOW_MAGIC_EN;
- }
- set |= AR_WOW_MAC_INTR_EN;
- REG_RMW(ah, AR_WOW_PATTERN, set, clr);
-
- REG_WRITE(ah, AR_WOW_PATTERN_MATCH_LT_256B,
- AR_WOW_PATTERN_SUPPORTED);
-
- /*
- * Set the power states appropriately and enable PME
- */
- clr = 0;
- set = AR_PMCTRL_PWR_STATE_D1D3 | AR_PMCTRL_HOST_PME_EN |
- AR_PMCTRL_PWR_PM_CTRL_ENA;
-
- clr = AR_PCIE_PM_CTRL_ENA;
- REG_RMW(ah, AR_PCIE_PM_CTRL, set, clr);
-
- /*
- * this is needed to prevent the chip waking up
- * the host within 3-4 seconds with certain
- * platform/BIOS. The fix is to enable
- * D1 & D3 to match original definition and
- * also match the OTP value. Anyway this
- * is more related to SW WOW.
- */
- clr = AR_PMCTRL_PWR_STATE_D1D3;
- REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, clr);
-
- set = AR_PMCTRL_PWR_STATE_D1D3_REAL;
- REG_SET_BIT(ah, AR_PCIE_PM_CTRL, set);
-
- REG_CLR_BIT(ah, AR_STA_ID1, AR_STA_ID1_PRESERVE_SEQNUM);
-
- /* to bring down WOW power low margin */
- set = BIT(13);
- REG_SET_BIT(ah, AR_PCIE_PHY_REG3, set);
- /* HW WoW */
- clr = BIT(5);
- REG_CLR_BIT(ah, AR_PCU_MISC_MODE3, clr);
-
- ath9k_hw_set_powermode_wow_sleep(ah);
- ah->wow_event_mask = wow_event_mask;
-}
-EXPORT_SYMBOL(ath9k_hw_wow_enable);
--
1.8.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
